Stainless Steel Food Grade Self-Priming Pump

Packaging & Delivery
Packaging Detail:carten and polywood case
Delivery Detail:2-3 days after payment
Specifications
 
 
 
 
 
Application:
The pump is mainly used to deal with the convey of gas-bearing materials.
So it is widely used in the occasions that the liquid level is unstable, and the liquid level is lower than that of inlet to draw the material, and also used as return in the CIP system.
And it is the necessary convey equipment in the food, chemical, pharmacy. Field.
 
Functions and specifications:
The design adopt the side channel principle leading to the excellent suction, sanitariality, low power, lower noise, easy to clean, and low cost to maintanance.
 
Shaft sealing: 
YUY sanitary priming pump seal is mechanical seal, include the stationary ring SUS316L steel embedded in grapgite structure, and the movable ring made of silicon carbide.
 
Material
All the part contact with medium, pump case. Pump cover and impeller are made of AISI316L stainless Steel. 
The part contact with medium: AISI316L stainless steel 
Other parts: AISI304 stainless steel 
The sealing contact with medium: EPDM
The part contact with medium is polished, and other part is glass painted or sand Blasted treatment.
Datasheet: 
Max Inlet Pressure: 0.5Mpa  
Temperature Range: -10°C to +140°C(EPDM)
Flushed mechanical seal:
Water pressure: Max0.1MPa
Water consumption: 0.25-0.5L/min
Motor
I)According to the configuration, we adapt three phase. The motor desiged 
According to the International Eltronical Commission IEC 60034. IEC60072, and comply with the 
EC requirements of "CE"marking requirement.
II). The explosion-proof motor also available, that can meet with the requirement of different 
Applications. 
III)It with excellent electric performance, and with low niose, low vibration, the protection grade is 
IP55, insulation grade is F. 
IV) The operate involtage 
≤ 3Kw, 220-240V/380-420V, /\ /Y 
> 3Kw, 380-420V/660-690V, /\ /Y 
V)Frequency 
50Hz/60Hz
VI)Operate way: Continously
VII)Running Speed: 2900r/min
PS:Performance curve could be provided!




 
Packaging & Delivery
Packaging Detail:carten and polywood case
Delivery Detail:2-3 days after payment
Specifications
 
 
 
 
 
Application:
The pump is mainly used to deal with the convey of gas-bearing materials.
So it is widely used in the occasions that the liquid level is unstable, and the liquid level is lower than that of inlet to draw the material, and also used as return in the CIP system.
And it is the necessary convey equipment in the food, chemical, pharmacy. Field.
 
Functions and specifications:
The design adopt the side channel principle leading to the excellent suction, sanitariality, low power, lower noise, easy to clean, and low cost to maintanance.
 
Shaft sealing: 
YUY sanitary priming pump seal is mechanical seal, include the stationary ring SUS316L steel embedded in grapgite structure, and the movable ring made of silicon carbide.
 
Material
All the part contact with medium, pump case. Pump cover and impeller are made of AISI316L stainless Steel. 
The part contact with medium: AISI316L stainless steel 
Other parts: AISI304 stainless steel 
The sealing contact with medium: EPDM
The part contact with medium is polished, and other part is glass painted or sand Blasted treatment.
Datasheet: 
Max Inlet Pressure: 0.5Mpa  
Temperature Range: -10°C to +140°C(EPDM)
Flushed mechanical seal:
Water pressure: Max0.1MPa
Water consumption: 0.25-0.5L/min
Motor
I)According to the configuration, we adapt three phase. The motor desiged 
According to the International Eltronical Commission IEC 60034. IEC60072, and comply with the 
EC requirements of "CE"marking requirement.
II). The explosion-proof motor also available, that can meet with the requirement of different 
Applications. 
III)It with excellent electric performance, and with low niose, low vibration, the protection grade is 
IP55, insulation grade is F. 
IV) The operate involtage 
≤ 3Kw, 220-240V/380-420V, /\ /Y 
> 3Kw, 380-420V/660-690V, /\ /Y 
V)Frequency 
50Hz/60Hz
VI)Operate way: Continously
VII)Running Speed: 2900r/min
PS:Performance curve could be provided!




 

PVC Doors And Windows Making Machine

PVC Doors And Windows Making Machine

1. It can produce PE, PP or PVC wood-plastic of by applying specially designed screw, material cylinder, mold and processing production technology and auxiliary machines for shaped material, the line is Wood-plastic Extruding Production Line.

2.it may produce PE, PP or PVC wood-plastic different shaped products.

The wooden-plastic mixing extruding production line adopts special-designed screw stem, material cylinder, moulds and processing technology.

3.Equipped with YE model auxiliary it can produce wooden-plastic profile. It is a new kind of environment protection products which Mix plastic and waste wood fiber in proper proportion, adding plastic processing extender.

4.It can produce, package box plate, frame material for door and window, floor board, outside products extruded in high temperature and high pressure

pvc doors and windows making machine,pvc windows and doors making machine,pvc doors and windows profile machine,upvc door and windows profile manufacturing machine

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstars-machineries.com