What should be noted when the magnetic separator is turned on and off?

What should be noted when opening and stopping the magnetic separator and operating it?

(1) Before driving, pay attention to check the power line, transmission, lubrication system and equipment around the situation, confirm the normal, can drive after the obstacles;

(2) The driving of the equipment shall be carried out in a certain order. Generally speaking, driving is carried out from the back to the front according to the process, and parking is reversed;

(3) When driving, first open the water pipes of each part of the equipment, the discharge port should start smaller, then feed the mine, and gradually adjust to normal operation;

(4) When all equipment is parked, contact the pump management personnel first, then stop the mine, and gradually close the water gate and the discharge port. If the water gate is closed without contact, the pump may collapse. Local parking should also be contacted in advance to determine the number of pump starts.

The operation of the magnetic separation process is to minimize the tailings grade under the premise of ensuring the quality of the concentrate. To this end, the operator must be "two diligence" and "two quasi". "Second Qin" is a diligent inspection and diligent contact. Diligent inspection is in the production process, the nature of the original ore, the concentration of the grinding, the color of the pulp, the quality of the product, and the condition of the water and equipment are normal, so that you can find out the problem in a timely manner. Always contact each other between the upper and lower processes, communicate the situation, and be proud of mastering the overall process of the festival. "Second standard" is an accurate judgment, and the heap is adjusted. That is to say, on the basis of “two Qin”, accurately determine the changes in ore properties and other process factors, and timely and accurately adjust the process.

Rail Tensor

Designed to perform the shearing and removal of the excess of metal accumulated during the welding, leveling in a homogeneous way the portion of the welded rail. It consists of a powerful hand pump which moves two hydraulic cylinders with the mobile shearing blade applied on, that, during the removing of the material, leans against the fixed cutting blades. The cutting blades are easily replaceable so as to adapt the tool to the rail profile to be processed. Two handles are placed in a well-balanced point, allowing an easy movement of the machine.

Rail Tensor,Hydraulic Rail Stressor,Hydraulic Rail Tensor,Rail Maintenance Tool

Shenyang Lubang Railway Maintenance Machinery Co.,Ltd. , https://www.srmfrailwayequip.com