Normally, there are two kinds of filter elements for the oil purifiers. One is the filter for filtering the particles; the other one is for oil water separation and with the function of demulsification.
The filters for filtering impurities are ordinary widely exists in various types of oil purifier machine, such as the transformer oil purifier, lube oil purifier, turbine oil purifier, portable oil purifier, etc. . this kind of filter is mainly used for filtering the Mechanical impurity and metal particles from oil, it is mainly made from stainless steel net mat type. For specially, some fine filters are polymer glass fiber filter or paper filter, they can achieve 1 micrometer or more better.
For oil water separator filter, it is made of special oil-wet hydrophobic cotton material ,this kind of filters are t commonly exist in a vacuum dehydration oil purifiers. Normally, the oil water separator is not dirty, to replace the filters only reference the conditions of saturation, such as the oil water separation effect is not obvious.
We would like to talk about the stainless steel net type oil filter, It is threaded coupling filter, when you install or dismantle the filter, you can rotate to take out the filter. To clean the filter with the same type of clean oil(or gasoline); you can cooperate with capillary soft brush to scrub filter surface (filter surface can pull open for cleaning). After cleaning, it is recommended to use air compressor, and to blow from inside to outside.
Tips: If you don't use equipment ready for a long time, we suggest that you discharge all the oil in the filter tank, especially in clod weather, please don't let the filter soaked in oil for long time when you stop oil purifying. In this way, you can effectively extend the service life of filter element
Basic Chemicals,Basic Chemical Raw Materials,Organic Basic Chemicals,Chemical Raw Materials
Jiangsu Zhongluman New Material Technology Co., Ltd , https://www.zlmchemical.com