In modern life, there are many types of garbage trucks. Different garbage trucks have their own advantages. In many models, garbage trucks are among the more technologically advanced ones. The general compressed garbage truck consists of a sealed trash can, a hydraulic system, and an operating system. Rubbish can be compressed and the produced sewage can be treated in time. Compacting garbage trucks not only increases the amount of garbage transported, increases the efficiency of garbage disposal, but also effectively avoids secondary pollution of garbage.
The Dongfeng Dolika compressed garbage truck adopts Dongfeng Dolika's second-class chassis and is modified by Cheng Liwei. The rated load of the vehicle is up to 2010kg, and it can transport more rubbish than ordinary rubbish models.
The length of the vehicle can be selected according to the requirements. There are two specifications of 6470 and 6320mm, width and height of 2050 * 2570 (mm), the maximum speed limit of 90km / h.
From the side of the car, you can have a general understanding of the structure of the entire vehicle. White spray paint is used on the front and the body parts, and the exterior of the car body is wrapped with blue paint.
The wheelbase of the vehicle is 3300mm and it has strong mobility. Steel ladders are welded to the left front of the car body, and guard rails are also installed on both sides of the car to prevent mud splashing and enhance the beauty. At the same time, it helps the operators to climb up and down the ladder.
The rear of the ladder is designed with a steel hydraulic tank with an oil level indicator. Since most of the functions of the vehicle require hydraulic functions, the hydraulic tank is used to store the oil needed to ensure the operation of the hydraulic system. The operator can check the capacity of the oil in the tank at any time.
The tail of the car is no different from the general garbage truck. We can clearly see the tipping bucket, scraper and skateboard. The entire part constitutes the vehicle's compression system. After a series of treatments, the garbage is loaded into the box.
Hydraulic cylinders can be seen on both sides of this model, enabling dumping of the trash can in the dump bin.
In the middle part of the compression pack, a solenoid valve is installed. Through the solenoid valve, we can achieve the functions of scraper, slide plate, tipping bucket, filler and push plate of the garbage truck. The operation of the electromagnetic valve of this model is relatively troublesome and needs to be always correct. Push the button until it finishes processing.
In addition to being controlled by a solenoid valve, this model is also equipped with a manual operation lever. The manual operation lever is located at the rear of the cab and is relatively concealed and can perform the same functions as the solenoid valve.
Above the manual operation lever is provided with a graphic instruction operation, and the corresponding operation lever realizes a corresponding function, which is convenient and practical.
At the bottom of the car body, a hydraulic cylinder is hidden to enable the garbage dumping function.
Dongfeng Duolika Compressed Garbage Truck has all the functions of a general compressed garbage truck. Its environmental protection features are also marked on the announcement. Customers with needs can select it on demand.
Bronze Parts,Machinery Plastic Parts,Carbon Steel Machining Metal,Plexiglass Parts
JING SUNG Precision CO., , https://www.zjcncmachining.com