Refrigerated vehicle lies in functional application

With the rapid economic development, cold-chain logistics is infiltrating everyone's life. However, due to the lack of sound regulatory systems in the cold chain industry, lack of industry standards, serious shortage of infrastructure such as cold storage, low utilization of refrigerated trucks, scattered and weak logistics companies, and lack of customer awareness of the cold chain, the domestic cold chain system has resulted Imperfections. According to reports, due to the lack of refrigerated transport capacity, most transporters do not use refrigerated trucks and only cover a Canon truck with a piece of canvas or plastic sheeting. As a result, nearly 1 million tons of fruit rot per year in China is degraded or devalued. The fish that are harvested also rot around 400,000 tons per year. The loss rate is as high as 25% to 30%, and the annual loss value is nearly 80 billion yuan. In contrast, the loss rate of fruits and vegetables in developed countries is generally controlled below 5%, and the loss rate of fresh fruits and vegetables in the United States is only 1% to 2%.

On the other hand, due to lack of refrigerated transport guarantee, it has become an important factor affecting the quality of food and medicine to a certain extent, and even caused a relatively high food and drug safety risk. Therefore, it is of great significance to choose a safe, reliable and fully functional refrigerated truck.

Cheng Li Special Purpose Vehicle Co., Ltd. has introduced a new generation of refrigerated and insulated cars with special technology for refrigerating and warming vehicles and vacuum adsorption equipment. The production of refrigerated carriage body adopts integrated skeleton "sandwich" plate bonding process, internal and external wall plates adopt domestic high-quality mechanism glass fiber reinforced plastic or color steel plate; middle insulation material uses 8mm thick imported polyurethane; the surrounding aluminum alloy of the carriage body is wrapped; Cast-in-situ glass steel, good insulation, overall strength; optional floor compartment ventilation slots, easy cooling air through the car, and maintain the balance of the temperature inside the car.

The refrigeration unit has well-known domestic and imported unit selection, and the temperature can meet the requirements of deep cooling. It has the characteristics of simple structure, reliable operation and reliable operation, low energy consumption, large cooling capacity, low noise, easy installation and maintenance, etc. The entire vehicle is manufactured using the latest international technology and new technology, and it has good insulation properties. Good appearance, high overall strength characteristics. The car body has heat insulation, strong heat preservation, high flatness, good impact resistance, and good corrosion resistance and aging resistance to atmosphere, water, and acid, alkali, salt and other media.

The top of the compartment is closed and cannot be opened; the cab is optional with the chassis; other refrigeration units with equivalent power can be selected, and the minimum temperature can be reduced to -18°C. According to the needs of users, they can professionally design any side door, different thickness of the car, sandwiching different temperature zones, different materials and colors inside and outside the car body skin and so on.

"Dealer": Program Manager
"Company Name": Cheng Li Special Purpose Vehicle Co., Ltd.

“Corporate Address”: Chengli Industrial Park, Shuangzhou, South Suburbs, Suizhou

" Fixed telephone"

" cellphone number"

"Contact QQ"

"Email Email":

"This information has been verified by China Automotive Network and is authentic and valid."

Open rubber and plastic mixing is the rubber factory used to prepare plastic rubber, rubber or hot refining, a type of roller exposed rubber refining machinery. This machine is suitable for EVA,rubber,synthetic rubber,hot melt and all kinds of chemistry raw material to mix ,mediate and disperse, and then put into the mass production. It is the best choice to test, make sample and learning in school. 

16inch automatic crusher mill

Advantage

1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard    and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.

2. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long    service life.

3. Self-aligning bearing is well matching with the bearing inside leakage-proof device.  The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.

4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.

5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.

6. This machine is installed with overload protection device which protect the machine will not broken if the machine is overload. The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.

7. The [U" shape frame is whole set casting, but other factory welded together.

8. The machine base is welded by national standard I steel.

Main parameter

Name	A  Automatic crusher mill
Front roller diameter (mm)(Smooth roller)	400
Rear roler diameter (mm)(Groove roller)	450
Roller length(mm)	840
Front roller speed (m/min)	12.67
Speed ratio	1:1.63
Max roller gap(mm)	10
Nip adjustment	Manual
Mixing capacity(kg)	20
Power (kw)	45-8
Motor RPM(r/min)	740
Reducer ratio	45
Reducer model	315
Roller bearing diameter(mm)	260
Bearing mode	352952YA
Bearing size(mm)	360×260×150

 

Name	B mixing mill
(mm) Front roller diameter(smooth roller)	400
Rear roller diameter (mm)(smooth roller)	400
Roller length(mm)	840
Front roller working speed (m/min)	19.36
Speed ratio	1:1.5
Max roller gap(mm)	10
Nip adjustment	Manual
Mixing capacity(kg)	20
Power (kw)	37KW
Motor RPM(r/min)	980
Reducer ratio	45
Reducer model	315
Roller bearing diameter(mm)	260
Bearing model	352952YA
Bearing size(mm)	360×260×150

 

Mixing Mill Manchine

Mixing Mill Manchine,Open Mill,Rubber Mixing Mill,Roller Mill

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , http://www.longxuanmachine.com