Recurrence of forest fire in Yunnan Jinning yesterday has spread to Yuxi City

Yunnan Jinning recurrence of forest fire yesterday has spread to diesel generators in Yuxi City | Diesel Generator Price / 2012-03-29

On March 23, Jinning County, Kunming City, Yunnan Province, just extinguished a forest fire. However, in less than five days, local forests were again subjected to mountain fires and torture. Yesterday at 2:20pm, a forest fire broke out in Qingshuihe Village, Kunyang Subdistrict Office, Jinning County. By 6pm yesterday, the fire had spread to Hongta District of Yuxi City.
According to the development trend of the fire field, the Yunnan Provincial Forest Fire Prevention Headquarters is mobilizing all forces that can be dispatched by the forestry units of the Kunming Armed Police Force to reinforce the Qingshui River fire field in Jinning County to extinguish the fire as soon as possible. After the night, how was the fire fighting saved? Lu Jianzhou, a police officer of the Yunnan Provincial Forest Corps, who was on the scene, introduced the new situation in detail.
Lu Jianzhou: We are now mainly divided into two fire lines: the northwest and northeast lines. Because there is a deep gully in the middle, there is no way to fight. The overall situation is like this, from 5 o'clock yesterday afternoon, the Armed Police Forest Corps will gradually send more troops to the fire, to the last night, the troops stationed in Kunming have all reached the fire. At 11 o'clock, the entire company re-planned the company and decided that the Sen police should be divided into two groups and that they should be divided into two groups to fight at the same time. Now the entire force is on the frontline and has been playing overnight. At present, the fire line on the northwestern side of the fire line is about 800 meters. It is visually estimated to be about 800 meters. The officers and men use the advantageous terrain of the mountain to expand the strength of the group and then directly fire the line.
On March 23, a forest fire had just occurred in Jinning County. On March 18th, a large-scale forest fire took place in Yimen County, Yuxi City and Anning City, Kunming City. Why did the Yunnan Fires occur so frequently during this time? In this regard, Lu Jianzhou believes that it is related to the drought-related weather in Yunnan.
Lu Jianzhou: I think we may still feel that the current weather in Yunnan has not been effective for several months in Yunnan. In addition, we saw in the fire, we have a lot of low shrubs in the forest of the fire are dry, a touch will be broken, this kind of shrub as long as there is a burning Mars, it is certainly related to the weather in Yunnan.
In addition, Lu Jianzhou said that the temperature in Yunnan today has been reduced and it should help the fire fighting work.
Lu Jianzhou: Looking at the situation today, the climate temperature is still somewhat lower today. These should be said to be a case of work. However, from the case of our corps, as long as there are Mars in Yunnan Province, the corps will mobilize the troops for the first time and heavily attack them to fight. “Playing early and hitting small fights” will achieve such a goal. It is to extinguish as soon as possible so that forest fire can be controlled in the initial state.
With regard to the new progress in the suppression of mountain fires in Jinning County, China Voice will continue to pay attention to you.
Next:Installation, use and regulation of marine diesel generator sets
Previous:The guy loves to sleep in the trunk of BMW and is used as a kidnapper

Clips and Fasteners are most commonly categorized as flat or sheet material that is formed into simple or complicated shapes. Most often, Clips and Fasteners are manufactured using both low and high carbon steels, depending on the application. In some applications, high carbon spring steels are utilized where a spring force is required that cannot be obtained with normal spring forces. When high carbon spring steels are used for manufacturing, it is a standard requirement that the product is heat treated and quenched to a hardness level that allows the product to flex without deforming. Heat treating and oil quenching are commonly used for the hardening process, but an Austemper heat treating process is typically the best practice for eliminating heat treat deformation.

Steels most commonly used in our process for manufacturing Clips and Fasteners are either low carbon, cold rolled steel (without heat treatment), and high carbon spring steels ranging from Grade 1050 to 1095, along with Stainless Steels and precious metals such as Brass, Phosphor Bronze, and Beryllium Copper. Clips and Fasteners that we manufacture typically range in material thickness of .010″ up to .080″, with many of our prototype and short run orders ranging from these sizes. We also have the capability of manufacturing designs in a wide range of shapes and sizes. We can supply Clips and Fasteners with a variety of special finishes or coatings to your specification along with various heat treating requirements.

Clip Materials

Material

Grade

Specification

High Carbon Spring Steel Strip

1050

ASTM A682 (AISI 1050)

 

1065

ASTM A682 (AISI 1060)

 

1070

ASTM A682 (AISI 1070)

 

1074

ASTM A682 (AISI 1074)

Stainless Steel Strip

301

ASTM A666

 

302

ASTM A666

 

316

ASTM A582 (AISI 316)

 

17-7 PH

ASTM A693 (631) (AMS 5529)

Non-Ferrous Alloy Wire

Phosphor Bronze

ASTM B103

 

Beryllium Copper

ASTM B194

High Temperature Alloy Wire

Inconel 600

ASTM B168 (AMS 5540)

 

Inconel x750

AMS 5542

Low Carbon Steel

Cold Rolled Steel (CRS)

ASTM A1008 (AISI 1008/1010)


Stainless Steel Clip

Spring Steel Clip,Stainless Steel Clip,Spring Clip,Stainless Clips

Nanpi Jian Tong Hardware Manufacturing Co., Ltd. , http://www.jiantongstamping.com

Posted on