ISK's new IQ series will appear in 2013

The Iska IQ series will be unveiled at CIMT2013 for the first time in China. Booth number W1-803, covers an area of ​​135 square meters. The bright red IQ background wall and blue roof will make Iscar's stand very eye-catching. The booth is composed of grooving knife, ISO turning tool, milling cutter, hole processing series and industrial exhibition stands. The fifth-generation MATRIX tool cabinet and tool recommendation system ITA will be specially displayed.

In 2013, Iscar fully promoted the IQ series. Its marketing activities included the IQ series national tour, which has been held in Beijing, Shanxi, Yinchuan, and Dalian, and will soon land in Xi'an, Qingdao, Chengdu, Changsha, Wuhan, and Guangzhou. The CIMT2013 exhibition will also be a highlight in the Iscar IQ series campaign.

New products in the IQ series cover the entire range of turning tools, cutting and grooving tools, milling cutters, drills and tool holders. At the exhibition site, visitors can follow the booth to focus on the following tools:

Grooving Knife Booth:

PENTA IQ GRIP, innovative dovetail positioning and clamping, high rigidity clamping, can withstand lateral force, deeper grooving and larger cutting diameter. The 20 gauge cutoff diameter of 20mm, 30 gauge cutoff diameter of 30mm, and the 40 gauge cutoff diameter of 40mm are also impressive.

DOVE IQ GRIP series, this grooving knife with a wide range from 10mm to 20mm, it is worth noting how ISKA achieves a high rigidity design of medium-heavy grooving burrs with dovetail clamping. The front-end locking mechanism makes the clamping mechanism press the blind hole of the bottom surface of the blade through the clamping screw, so that the blade dovetail closely contacts the positioning groove; and the design of the front inner cooling nozzle enables the coolant to reach the cutting area between the blade and the workpiece effectively. cool down. Without the design of the upper pressure block, the chip evacuation is more smooth.

The DO-GRIP IQ 550 series can focus on the higher rigidity gripping method of the grooving groove of the arbor and the grooved insert, while the extended blade makes it possible to cut the diameter of 48mm at the cutting width of 2mm. .

High-precision tool holder (PICCO ACE) with PICCO shank holder. Can meet the customer's need for high-precision machining and flexible clamping. With high precision, high rigidity, high flexibility in the clamping direction (360° clamping).

ISO Tool Knife Booth:

Economy ECO TYPE inserts, thicker than conventional inserts, are clamped to a standard ISO turning bar with a specific knife pad. Its economy is reflected in the ability to use a small size blade to complete the cutting, such as the use of CNMG 09 ... car blade to achieve conventional CNMG 12 ... car blade cutting parameters.

25°Narrow corner blade YNMG, based on a VNMG blade with a 35° nose angle, has a 25° nose angle, making the blade more accessible. This insert is designed for turning very narrow V-grooves, especially for applications where the 35°V NMG tool nose angle cannot be machined.

SAFE-T-LOCK, high rigidity profiling turning tool for machining high-precision contours. The bottom pyramid of the insert matches with the long wedge-shaped positioning groove on the arbor, and the cutting edge of the insert has higher repetitive positioning accuracy. In the profiling processing, no change in the cutting direction occurs after the cutting direction is changed.

COMBI D LOCK, innovative upper pressure lever clamping, LR 4TL TOP LEVER lever combines the advantages of upper pressure and lever clamping, firmly clamping the blade due to the rake face barrier-free Makes chip removal smoother and faster blade replacement. This pressure-up lever replaces the LR4 lever for use on any turning bar with LR 4 levers.

DOVE IQ TURN heavy-duty machining series, new double-sided wedge-shaped pressing roughing blades, dovetail positioning and lever-type clamping mechanism ensure smooth chip unloading while maintaining firm grip. Pressing double-sided wedge blades embodies Iscar's cutting edge press molding technology.

DOVE IQ TURN•FEEDTURN, 18.5° Lead Angle, brand new double-edge wedge roughing blade, feeds up to 1.00-2.50mm/rev.

HEAVY SUPER TURN, LOMX vertical loading blade, length 40mm, width 14.4mm, height 22mm. Maximum depth of cut 35mm, maximum feed 2mm/rev, dedicated to heavy duty industries.

Milling Knife Booth:

The HELI IQ MILL 390 series, with 3 helical cutting edges, replaces the common HELIMILL milling inserts with 2 cutting edges on the market. In addition to the more economical advantages of a cutting edge, 90° high precision shoulder milling can also be achieved.

Two-sided spiral edge milling cutter (HELIDO) 690 series with 6 helical cutting edges for 90° high precision shoulder milling, is an upgraded version of the H490.

Helical ALU HSM90S series, the slotted design at the bottom of the insert ensures firm clamping, eliminating the radial movement of the blade due to centrifugal force at ultra-high speeds, resulting in more stable machining and longer tool life.

MILL SHRED P290 series, the wave-edge milling inserts can obtain very small chips and perform well in deep cavity machining. The design of the positioning groove of the cutter body makes the edge of the waveform be staggered and realizes the use of the waveform edge to obtain a more straight side wall.

DOVE IQ MILL 845 series, IQ845 milling cutters are impressive in shape, double-sided milling inserts, front cutting edge corresponds to the wiper on the back, and cutting edge utilization is high. The blades are clamped in dovetail positioning slots. The screws are fastened and the clamping rigidity is extremely high.

Two-sided spiral edge milling cutter (HELIDO) H606 series, each blade with 6 edges covering R6mm arc within the range of 90 ° angle, unlike circular blades, R6 arc connecting straight edge, used for connecting side Shoulder milling. Particularly suitable for the energy industry.

HELI2000 vibration-reducing and noise-reducing milling inserts can be clamped on any HM90...Cutter body with two asymmetrically designed cutting edges. The flank faces of different cutting edges are marked with different colors. Different blade edge inclinations are beneficial to Chips. It is more efficient to hold the milling inserts in the even-numbered effective tooth milling cutter body, and the yellow back flank is connected to the adjacent positioning groove in the order of the black back flank.

The T-Slot SD-SP15 series consists of a replaceable carbide T-slot milling head and a cylindrical shank steel shank for narrow-slot milling. The unique splined shank of the cutter bar transmits the torque more effectively, which can more effectively resist the large cutting forces during slot milling and the bending moment during large overhang machining.

Hole processing stand:

The beam magic chameleon drill (SUMOCHAM), drilling depth of 12xD, all drill pipe with spiral inner cooling through holes, can be used to process laminated plates.

The SUMO UNI CHAM can be clamped in a standard chamfering set. Drilling and chamfering are completed in one step.

Flat SUMOHAMA (SUMOCHAM), FCP drills holes to obtain approximately flat bottomed holes for many machining applications, such as countersunk screw holes.

SUMO GUN, the standard beam magic chameleon drill head with 2 effective cutting edges, the table feed in the processing is much higher than the conventional gun drill in the market. The quick tool change greatly reduces downtime. Drilling diameter range of 12-25mm, total drilling depth up to 1500mm.

Tool holder:

The single-side hydraulic hydraulic shank (HYDRO SURE) combines the advantages of side clamp and hydraulic clamping. It has high torque transmission performance and can prevent axial and radial tool turbulence. The high coaxiality is 0.003mm.

ER SURE COLLET utilizes high rigidity drive key to transmit high torque, avoid axial and radial turbulence, only need to replace ER clamping spring to upgrade clamping system, especially suitable for heavy-duty machining and complex Processing applications. Can hold cylindrical shank, flattened shank and oblique flat shank. This eliminates the risk of damage to expensive parts due to tool shedding or tool turbulence.

Iscar's high-pressure cooling tools are continuously updated. Everyone can observe high-pressure cooling ISO turning tools on site. The high-pressure cooling jet ejecting from the rake face and the flank face at the same time is also a feature of Iscar's high-pressure cooling turning tool.

Iska put forward the theme of "manufacturing with wisdom to make changes" and launched the IQ series, which is a tool feast created by following imagination. "Innovation is never ending" is the philosophy that ISCA has consistently adhered to. The company therefore proposes new ideas every few years. With the development of new products, every new series of products launched also has major breakthroughs. As Mr. Jacob Harpaz, CEO of Iscar said: “Israel lacks natural resources, so we can only seek to survive through continuous innovation.” Perhaps it is this sense of crisis that has caused Israel’s “Iska” to Think of "innovation" as the company's growth and development.

The IQ series was developed by Isk for the 60th anniversary. There is no constraint, only galloping imagination, the pursuit of the limits of efficiency. Yes, tools can do this!