Connection monitoring knowledge of wireless monitoring system

Wireless monitoring has become an increasingly important part of the monitoring industry, and more and more customers are starting to use it. However, for the first-time customers, they will still encounter problems with some installation connections. Shenzhen Lai today. Security Technology Xiaobian uses our 5.8G 300M high-performance wireless bridge as an example to explain in detail the basic installation principle of wireless monitoring.

A complete set of wireless monitoring is divided into transmitting and receiving ends. The transmitting end is composed of a wireless bridge, a network HD camera, and a POE power supply module. The POE power supply module indicates the POE end interface and is connected with a Super Category 5 or Super Category 6 cable. Wireless bridge, indicating that one end of the LAN interface is connected to the network HD camera with Super Category 5 or Super Category 6 cable, indicating that the positive and negative ends are connected to 220V voltage supply, and the back-end receiving and front-end transmitting basic connections are the same, and only the LAN interface needs to be connected. Into the NVR network to access the hard disk or the switch. This complete set of wireless monitoring transceivers with a good connection topology diagram is as follows:

The above is the analysis of the most basic wireless monitoring connection diagram, and also the simplest point-to-point connection diagram. If you have any knowledge about wireless monitoring, you can call our technical staff at any time. The actual project will design a more professional wireless monitoring solution for you. At present, our company has launched non-line-of-sighted wireless transmission equipment, COFDM soldier system, wireless image transmission, and mobile 3G/4G wireless network transmission. Distance restrictions are not affected by obstacles. For more wireless knowledge, wireless monitoring system, please call Shenzhen Leian Technology Co., Ltd.