The Ministry of Industry and Information Technology announced that the 9 new energy battery projects of the 9 smart manufacturing pilot demonstration projects were selected.

On October 16, the Ministry of Industry and Information Technology released the list of 2017 smart manufacturing pilot demonstration projects, and a total of 97 enterprise units were selected. After combing it found that the new energy battery industry and related industrial chain a total of nine companies selected for the project, include the new energy automotive battery, solar modules, lithium batteries digital workshop, lithium battery materials, intelligent manufacturing pilot demonstration projects. See the table below for details.

Note: The project marked as * is also a pilot project for industrial Internet applications.

It is understood that the Ministry of Industry and Information Technology has started the recommendation work for the pilot project of intelligent manufacturing every year since 2015. So far, three batches of demonstration projects have been reviewed. In 2015, the first batch of 46 were reviewed, the second batch of 63 in 2016, and the third batch of 97 in 2017.

The purpose of the Ministry of Industry and Information Technology to carry out the recommendation work of the intelligent manufacturing pilot demonstration project is to implement the overall deployment of "Made in China 2025", form a batch of intelligent manufacturing standards in key areas, continuously form and promote a new model of intelligent manufacturing to demonstrate and accelerate the implementation of China's intelligent manufacturing engineering. .

Miao Wei, Minister of the Ministry of Industry and Information Technology, said that smart manufacturing has increasingly become a major trend and core content of the future development of the manufacturing industry. It is also an important measure to accelerate the transformation of the development mode and promote the industrialization of the medium and high-end industries and build a manufacturing power. "It is important to use the pilot demonstration. Grasp the promotion of smart manufacturing in China, fully mobilize the enthusiasm of enterprises, pay attention to the growth of pilot demonstration projects, and form effective experiences and models through breakthroughs in points, and promote and apply them in various fields of manufacturing.

This year's smart manufacturing pilot demonstration project is based on the requirements of the Smart Manufacturing Development Plan (2016-2020) and the Smart Manufacturing Engineering Implementation Guide (2016-2020), focusing on five intelligent manufacturing models. Encourage new technology innovation and application, and carry out pilot demonstrations of smart manufacturing. The five intelligent manufacturing modes are discrete intelligent manufacturing, process-based intelligent manufacturing, network collaborative manufacturing, large-scale personalized customization, and remote operation and maintenance services. The projects declared by enterprises must meet the specific requirements of the corresponding models.

In addition, the projects declared by the company must be put into operation, and have achieved remarkable results in reducing operating costs, shortening product development cycle, improving production efficiency, reducing product defect rate, and improving energy efficiency, and are domestically in project technology. Leading or international advanced level.

The Ministry of Industry and Information Technology said that the recommendation for smart manufacturing pilot demonstration projects should follow the principle of government guidance and corporate voluntariness. The recommendation department should strengthen guidance on the final pilot demonstration projects and support the development of smart manufacturing.

TX1D1H

Cnc Plasma Cutting Machine for plates cutting, mainly used for the cutting steel plates of steel structure, bridge, petrol platform industry and so on.

- Hyperthern 75A 100A 125A 200A power supply

- Effective cutting width and length as buyer request

- plasma cutting and flame cutting

-200m cutting torch lifting distance

-0-9000mm/min

-0.05 speed tolerance

TX-XY Series CNC Plasma Cutting Machine for round and square pipes

Used for the cutting pipes of steel structure, bridge, petrol platform industry and so on

-round pipes from 100mm-1500mm

-square pipes from 100mm-1500mm

-12m pipes length

-one plasma and one flame cutting

Applicable Industry:

1. metal sheet cutting for signs and advertising

2. Automobile and ship manufacturing

3. Construction machinery manufacturing

4. Sheet metal processing

Main Features

1. Special R&D heavy-dutysteel lathe structure for big size steel processing, strict vibration aging treatment, effective removal of welding residual stress, the lathe can work ten years without deformation

2. Advancedspecial CNC plasma control system, with parameters presetting, memory, LCD display, automatic arc starting and stopping functions , stable performance

3. Gantrytype structure with special light crossbeams design, good rigidity , small inertia.

4. Unique slope leakage table design, easy to collectthe finished workpiece and broken materials, safe and convenient

5. High-precision linear guide rail, with high-speed rackgear transmission, to ensure long-term stable running.

6. High compatibility with CAD/CAM software such as Type3, ArtCam, AutoCAD, Ucancam, Jdpaint etc

7. Highsensitivity Auto arc voltage height control system, automatically adjust the best cutting distance, to ensure the high precision cutting (optional)

Plasma Cutting Machine

Plasma Cutting Machine,Cnc Plasma Cutting Machine,Plasma Machine,Cnc Cutting Machine

Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com