The latest temptation of the sprinkler, 10 non-water tanker is his!

Speaking of 10 square sprinklers , it is really a very nerve-racking thing. I will not speak of this tonnage can choose to configure how many, say the brand is a hassle. Suizhou Cheng Li, Xiamen Engineering Chu Sheng Although all low-end, but the small but perfectly formed, after all, can achieve spraying operations and other functions, and the price is relatively low. For the high-end , Zoomlion and Fujian Fulong horses have also performed satisfactorily , but the prices are too high to accept . If you want high-end quality and reasonable price too! I think this non- Heavy-Car Specialist "Green Leaf" brand sprinkler is none other than.

Speaking of the "Green Leaf" brand 10 sprinkler trucks of CNHTC , it is indispensable to talk about its detailed configuration.

First of all, this product is equipped with a Haohao chassis produced by CNHTC Jining Commercial Vehicle Co., Ltd. This Haohao chassis uses a MAN technology 180 horsepower engine, which has a powerful acceleration, fast combustion , low fuel consumption, excellent performance , long service life, and after-sale enjoyment. The company's unique family service guarantee.

Secondly, the tank raw materials are all made of high-quality national standard steel produced by domestic large-scale iron and steel enterprises, and are sprayed with a primer after shot blasting. After the can body was welded, local rust was removed, and then JX-GAB modified heavy anti-corrosion paint was applied by hand . The product is modified macromolecule resin plus special anti-corrosion material, and uses a unique curing system to form a cross-linked network to form a cross-linked film. It has good resistance to acid, alkali, salt, oil, water, etc., and has anti-aging properties, which can be greatly extended The service life of the tank.

Again, the pump uses a dedicated sprinkler pump with the following features:

1. The input shaft obtains the required speed of the pump through the speed increase box. The pump is small in size and light in weight.

2. Is a self-priming centrifugal pump, has a strong self-priming ability.

3. Simple structure, reliable operation, easy maintenance and high efficiency.

4. The impeller uses a double seal ring to flatten the transverse hole structure, reducing the axial force and improving the bearing life.

5. Shaft seals use mechanical seals.

Parameters: Speed ​​1450r/min, Flow: 50m 3

Flow rate 50m 3 /h, Head: 110m, Power: 25

Look! Such a cost-effective sprinkler will be an indispensable tool for the greening of municipal garden sanitation systems, corporate schools, residential properties, and road maintenance .

China National Heavy Duty Truck Group Jinan Special Vehicle Co., Ltd.

Address: No. 17668 Panwang Road, Zhangqiu District, Jinan City, Shandong Province

phone

18653151955

Medical Oxygen Generator are normally installed in hospitals and clinics, especially for remote areas where cylinder oxygen is difficult to buy. 

Medical Oxygen Generator has similar structure with Industrial Oxygen Generator, just at the end pipelines, there are bacteria remover and odd smell remover.  Oxygen generator uses Air Compressor to get raw material, the compressed air.  The compressed air is treated by air treatment part, which has oil remover, filters and dryer. After treatment, clean air goes to oxygen separator. In this part, the oxygen in the air is separated and collected from top of machine, then goes into a buffer tank to make flow rate stable. At the end of buffer tank, there is flow rate meter and analyzer,etc to adjust flow rate and test oxygen purity.

Details process is as below:

Medical Oxygen Generator Specification:

Flow rate: 1-200 Nm3/hr

Purity: 90-95%

Outlet pressure: 5-10 bars

Medical Oxygen Generator

Medical Oxygen Generator,Medical Oxygen Generators,Medical PSA Oxygen Generator

Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagas.com