![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The seasons in which the winter and autumn seasons alternate are always frequent with strong winds, especially in the north where the wind is full and dusty. This is not a happy thing for driving a suction truck (sucking car). So, what are the tips for driving a suction truck (dump truck) in windy weather?
Driving under strong wind conditions should be based on wind direction, wind speed, and whether there is wind and sand, and special attention must be paid in order to drive safely.
When driving in a strong wind, the speed should be properly slowed down, the wind direction should be correctly identified, and the steering wheel should be held firmly to prevent the driving route from shifting due to wind power. Pay attention to the lateral stability of the vehicle, minimize overtaking, and extend the time appropriately when honking.
When driving against the wind, you should pay attention to a sudden change in wind direction or a large camber in the road. The sudden decrease in wind resistance will increase the speed suddenly. During driving, pedestrians should be prevented from escaping from the dust raised by the vehicle and suddenly run to the other side of the road when the vehicle approaches.
In the windy and sandy days, the front lights should be turned on and diligently horned to draw attention from pedestrians and vehicles, and to proceed slowly and ready for braking.
When driving on a windy day at night, anti-glare low-beam lights should be used. High-beam lights should not be used to avoid the glare of the light curtain and affect the line of sight.
When the wind is particularly heavy, the vehicle should be parked on the windward side of the road, with the front facing away from the wind and semi-closed shutters to prevent the fine particles from being sucked into the cylinder and accelerating the wear of the machine parts.
Cargo vehicles should be fastened to the tarpaulin on the car to secure the cargo on the car. Lightweight and bulky materials should be loaded to avoid the storm, so as to prevent the vehicle from being blown away from the normal driving route by the storm.
Precautions
1. When driving on a dusty road, care should be taken to maintain a safe distance from the vehicle to prevent the dust raised by the preceding vehicle from obstructing sight.
2. The stability of bicycles, tricycles, motorcycles, etc. is affected by the wind, and the safety distance should be increased when they meet.
3. When driving in a windy weather in a rocky area, care should be taken that small stones often roll on roads, thereby damaging people and vehicles.
4. The weather in the desert area is abnormal and driving is difficult. It also poses a danger to the components and cargo loading of the suction truck ( suction truck ). It is necessary to know the local weather conditions in time and choose a good route and time.
Brief Introduction:
Cone crusher is usually used as a secondary and third crusher in a crushing circuit, widely used for crushing medium and hard stone, such as iron ore, copper ore, limestone, basalt, granite and dolerite. Zoneding Cone Crusher has three types: Spring Cone Crusher, symons cone crusher and Hydraulic Cone Crusher.
Spring Cone Crusher:
Symons Cone Crusher:
Hydraulic Cone Crusher:
Features:
1. Large crushing ratio and high working efficiency.
2. Perfect lubrication device guarantees machine reliability.
3. High quality wear-resistant parts reduce operating cost.
4. Long life and extensive use.
Cone Crusher
Cone Crusher,Spring Cone Crusher,Hydraulic Cone Crusher,Mining Cone Crusher,Stone Crusher
Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co.,Ltd. , http://www.zonedingmac.com