1, Energy saving,lower consumption,including steam,electric.
2, Electric engine is controlled by the pedal,which make sure of its span life.Built with electric heating system
and up-vent structure.
3, High power motor and large size wind impeller,which ensure strong suction wet strength.
4, When using the waving-arm,you can change the suction function between table and die head.
5, Big working table-board,you can iron garments conveniently.
6, The bottom board built-in stainless steel mesh,ensure long using time.
Technical Parameter
Â
Model | IT-001 |
With equipment outside | Steam Generator |
Motor Power - kw | 0.55 |
Steam Consumption-kg/hr | 3.8 |
Width - mm | 1500 |
Depth - mm | 950 |
Height - mm | 1800 |
Net Weight-kg | 50 |
1, Energy saving,lower consumption,including steam,electric.
2, Electric engine is controlled by the pedal,which make sure of its span life.Built with electric heating system
and up-vent structure.
3, High power motor and large size wind impeller,which ensure strong suction wet strength.
4, When using the waving-arm,you can change the suction function between table and die head.
5, Big working table-board,you can iron garments conveniently.
6, The bottom board built-in stainless steel mesh,ensure long using time.
Technical Parameter
Â
Model | IT-001 |
With equipment outside | Steam Generator |
Motor Power - kw | 0.55 |
Steam Consumption-kg/hr | 3.8 |
Width - mm | 1500 |
Depth - mm | 950 |
Height - mm | 1800 |
Net Weight-kg | 50 |
The feature of rubber tracks
(1). Less round damage
Rubber tracks cause less damage to roads than steel tracks and less rutting of soft ground than either steel tracks of wheel products.
(2). Low noise
A benefit to equipment operating in congested areas, rubber track products less noise than steel tracks.
(3). High speed
Rubber track permit machines to travel at a higher speed than steel tracks.
(4). Less vibration
Rubber tracks insulate machine and operator from vibration, extending the machine's lifetime and lowering operate fatigue.
(5). Low ground pressure
The ground pressure of rubber tracks equipped machinery can be fairly low, about 0.14-2.30 kg/ CMM, a major reason for its use on the wet and soft terrain.
(6). Superior traction
The added traction of rubber, track vehicles permits them to pull twice the load of wheel vehicles of the sane weight.
Application and Features:
1. Suitable for the small wheelchair.
2. Can load weight about300-400KG
3. Length can be adjusted.
4. Sprocket is available.
Characteristics of rubber track:
1). Less damage to the ground surface
2). Low noise
3). High running speed
4). Less vibration;
5). Low ground contack specific pressure
6). High tractive force
7). Light weight
8). Easy to change
Crawler Chasis,Crawling Chase,Undercarriage For Drilling Machine,Rubber Track For Drilling Rig
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.nbxitecdrilling.com