Star Product: Spiral Wound Gasket From Sunwell Seals/Cg/Cgi/IR/R Type

Star product:Spiral wound gasket from Sunwell seals/CG/CGI/IR/R Type

1.Products are manufactured in accordance with all relevant gasket standards.
2.All types of Spiral wound gaskets can be manufactured, CG, CGI, R, RIR, etc.
3.Our production capacity is 150,000 pcs per month.
4.Material combinations for all operating conditions. 
 

Sunwell seals spiral wound gaskets have 4 types:

1.SW600-R Basic Type

Basic construction type, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. - Suitable for tongue and groove, male and female or grooved to flat face flange assemblies.

2.SW600-IR Inner Ring Type

Solid inner metal ring acts as a compression stopper. To prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion, damages of gasket between flange bore and the inside diameter, the annular space is filled up by solid inner metal ring. - Suitable for male and female pipe flanges.

3.SW600-CG Outer Ring Type 

Solid outer ring accurately locates the gasket on the flange face to give the additional radial strength to prevent the gasket blowout and acts as a compression limiter. In case of installing the outer ring, it is very easy to install the gasket to flange face because the end of outer ring will touch at bolts - Suitable for use with flat face and raised face flanges. For class 900 and above an internal ring is recommended.

 

4.SW600-CGI Inner & Outer Rings Type

A inner ring and outer ring type gasket will give an additional compression limiting stopper for gasket inner and outer side. It will prevent the corrosions on flange face at annular space. - Suitable for use with flat face and raised face flanges and specified for high pressure / temperature service - Class 900 and above or where corrosive or toxic media are present.

The launch of new-type high pressure diesel portable screw air compressors with large displacement and high wind pressure, accurately and perfectly exert the best critical point of the impactors, therefore, customers are no longer worried about unstable flow and insufficient pressure in use. They are even able to support two sets of semi-hydraulic Drilling Rigs for stable use to meet the constant pursuit for efficiency in the market. Equipment operation status can be fully monitored, control panel in English and Chinese, the equipment running status most obvious. Non-normal automatic shutdown function is matched to ensure people and machines secure.

High Pressure Diesel Portable Air Compressor

High Pressure Diesel Portable Air Compressor,Portable High Pressure Screw Compressor

Quzhou Able Machinery Equipment CO., LTD. , http://www.ablejx.com