Requirements for FRP Sluice Wells

The glass fiber reinforced plastic septic tank is made of synthetic resin as the matrix and glass fiber reinforced material. It is specially used for the treatment of domestic sewage. The glass fiber reinforced plastic septic tank is widely used in chemical industry due to its advantages of high strength, good toughness, and corrosion resistance. , petroleum, construction, textile, aviation, electricity, metallurgy, machinery, environmental protection and other fields.

Construction process of glass steel septic tank cleaning wells

1. Backfill to meet the requirements of the construction specification. The well body can be built with clear wells (inspection wells). There are two kinds of brick wells and group prefabricated reinforced concrete wells.

2. Inspection wells In order to prevent the leakage of the brick wall, the inner and outer walls of the well shall be waterproofed with a mortar and plastering layer. The thickness shall be 20mm (1:2 waterproof mortar, 5% of the water resistance of the internal reference cement weight), and the inside corner shall be wiped. 45. Beveled, 50mm thick. When groundwater is present, apply hot asphalt (or other waterproof coating) on ​​the outside of the well. Finally, cover the soil to the floor.

Requirements for the construction of a glass reinforced plastic septic tank for clearing wells 1. When excavating the foundation tank, the geological conditions should be mastered.

2. The location and buried depth of glass steel septic tanks should be laid and positioned strictly in accordance with the design requirements.

3. After the glass fiber reinforced plastic septic tank is in place, backfill the soil in time and fill the tank with water to prevent displacement. The backfill requires sifting. There is no sharp corner stone and construction waste. When there is no groundwater, the soil density is 0.95 compacted. Special attention should be paid to the use of plain soil or yellow sand around the tank body: when there is groundwater, the tank body should be filled with plain soil or yellow sand, and the tank body should be evenly loaded.

4. During the construction of the rainy season, drainage facilities shall be provided to prevent water accumulation in the foundation pit and collapse of the slope. At the same time, the tank body shall be filled with water to prevent it from floating and cause displacement.

5. Construction shall comply with the provisions of the relevant project construction and acceptance specifications.