News Analysis: Power Industry Security Development Faces Three Pressures

Shi Yubo, vice chairman of the State Electricity Regulatory Commission, stated on the 1st that China’s electric power industry has made remarkable achievements in its development. However, in the rapid development of the power industry, resources and environmental constraints, power science and technology levels lag behind, and the power emergency system is still not perfect. Three major pressures for achieving security development.

According to Shi Yubo, since the founding of the People's Republic of China, especially since the reform and opening up, China's power industry has developed rapidly, and the country’s installed capacity for power generation has been ranked second in the world since the end of 1996. In 2007, the country’s total power generation reached 3255.9 billion kWh, and the entire society used 3.2458 trillion kWh of electricity, which basically met the needs of the national economy and social development for electricity. In terms of power grid construction, with the formation of a 500 kV voltage-grade backbone network shelf, the nationwide networking landscape has basically been realized, and West-to-East power transmission and north-south cooperation have begun to take shape, and the allocation of electrical energy resources has been optimized.

At the same time as the rapid development of the electric power industry, electric power technology has been continuously innovating, production efficiency has been significantly improved, and the level of electric power environmental protection and the reliability of electric power have been continuously improved. The power consumption standard coal consumption dropped from 471 g/kWh in 1978 to 334 g/kWh in 2007; the line loss rate decreased from 7.70% in 2000 to 6.85% in 2007. The reliability of power supply to users of the national 10 kV power supply system in the country reached 99.882%.

Despite the rapid development of the electric power industry, some factors that restrict and affect the development of electric power safety still exist.

First, the development of electric power safety is constrained by resources and the environment. The proportion of coal-fired electricity in China is relatively high. Over the years, thermal power generation has accounted for 80% of China's total electricity generation, and electricity supply has a high dependence on electricity coal.

China's coal resources are mainly concentrated in the western and northern regions, while load centers are mainly concentrated in the eastern region, with the supply of coal, natural gas and other resources and limited capacity, especially in the case of severe weather and other natural disasters, the power system security Stable operation will have some impact. At the same time, the pressure of environmental protection also imposes certain constraints on the development of electric power safety.

Second, the level of power technology can not meet the needs of power security development. As China's large-capacity, ultra-high voltage, AC-DC hybrid and long-distance transmission projects continue to be put into operation, the scale of interconnected power grids continues to expand, the complexity of power systems has increased significantly, and the issue of safety and stability of power grids has become more prominent. The basic research work on the safety and stability of power systems has been conducted. Urgently need to be strengthened.

At the same time, there is still a big gap between the overall technical equipment level of China's power industry and developed countries, and the capacity for independent innovation is weak. The level of localization in wind power, nuclear power technology, clean coal power generation technology, large-scale ultra (super) critical units and HVDC transmission equipment and other technologies (equipment) is relatively low, and some of them are still unable to achieve self-development and design.

In addition, the power emergency system still cannot fully meet the requirements of electric power safety development. In recent years, frequent natural disasters have caused various degrees of impact on the power system.

Shi Yubo said: “The typhoon in the southeast coastal areas and the snowstorm in the northeast region, especially the low-temperature snow and ice and snow disasters that occurred this year, and the May 12 earthquake in Wenchuan in Sichuan Province have all exerted a severe test on the emergency response capability of the power system.”

Plain Trolley introduction

GCT Plain trolley is a kind of lifting device and it has its own characteristics of simple structure and easy operation. It can be attached to chain hoist of Electric Hoist or any other loading machinery to form a loading trolley. It can be easily running on the botton flange of I beam track at a curve radius for loading and unloading goods and equipments.

By different way of driving , the trolley series can be divided into two types: Geared trolley(GCL) and Plain trolley(GCT). The plain trolley is operated by pushing the load and for the geared trolley, we can pull the hand chain to drive it.

Advantages:

1.Plain trolley series is a kind of lifting device and it has own characteristics of simple structure and easy operation.

2.it can be attached to Chain Hoist or Electric Hoist or any other loading machinery to form a loading trolley.

3.It can be easily running on the bottom flange of beam track at a curve radius for loading and unloading goods and equipment.

4.By different way of driving . the trolley series can be divided into two types: Geared Trolley(GCA)and plain Trolley(GCA) the plain trolley is operated by pushing the load and for the geared trolley. We can pull the hand chain to drive it

Specifications:

Products show

Additional features and benefits include:
1.Rugged steel side plates formed to include bumpers and trolley guards
2.Frames connected by steel equalizer pin, secured by two nuts on each side
3.Universal tread flanged track wheels equipped with shielded ball bearings
4.Easy rolling on international standard shapes, wide flange shapes or patented rail
5.Hardened wheels and axles for added strength and durability
6.Spacer washers can be shifted inside or outside for easy adjustment to wide range of beams
7.To be used with hook suspended hoist
8.Suspension plate for easy attachment is standard
9.Bearings prepacked with lifetime lubricant
10.One-year warranty
Our Services

1.Client

We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.

2. People

We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.

3. Product

Our products are of HIGH quality standards and always come with certificate of compliance by the manufacturers.

4. Performance

We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.

5. Free sample and OEM service

We can provide free samples to you and we also have OEM service, we can put your logo on the label and the information you need on the webbing too.

Plain Trolley

Adjustable Plain Trolley,Manual Plain Trolley,Plain Beam Trolley,Plain Push Trolley

Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggings.com