Mechanical knowledge base: "trapezoidal grinding"

TGM160 series super-pressure trapezoidal mill is referred to as trapezoidal mill for short. It is our company's expert on the basis of long-term experience in grinding machine R&D. Based on the requirements and recommendations of several domestic and foreign mill users, it is based on the original high-pressure suspension mill. The latest type of milling machine is designed and researched with great concentration. The model adopts a trapezoidal working surface, flexible coupling, and roller combined pressurization to reach the advanced level of the milling equipment. It completely overcomes the defects of the traditional industrial milling machine in terms of range of use, production, fineness, energy consumption, service life, etc. It is the best alternative to traditional milling machines such as Raymond Mill, high pressure suspended roller mill, and ball mill.

use

The TGM160 series super-pressure trapezoidal milling machine fully considers the desulfurization and milling requirements in the design, and can be perfectly matched with the desulfurization equipment, thereby increasing the desulfurization efficiency and becoming the preferred equipment for desulphurization and milling at home and abroad. At present, the model has been widely used in electric power, mining, metallurgy, chemical industry, iron and steel, building materials, coal and other industries, resulting in a huge economic and social benefits. Mainly used in mining, building materials, chemical, metallurgy, thermal power, coal and other industries grinding Mohs hardness below 9.3, humidity below 6% of a variety of non-inflammable and explosive mineral products, finished fineness can be 30- Adjustable up to 400 mesh, such as cement (raw clinker), quartz, feldspar, calcite, dolomite, graphite, fluorspar, wollastonite, phosphate rock, calcium magnesium phosphate fertilizer, coal, coal gangue, slag, zircon sand More than a thousand materials such as talc, granite, potash feldspar, marble, barite, ceramics, and glass are ground.

The main process of the TGM160 trapezoidal milling machine is to drive the center shaft through the reducer. The upper end of the shaft is connected with a roller hanger. The rack is equipped with a roller device and forms a swing fulcrum. The roller device not only rotates around the center shaft, but also Also around the revolution of the grinding ring, the grinding roller itself rotates due to friction. The roller conveyor is equipped with a blade system. The position of the grinding roller is at the lower end of the roller. The blade throws up the material and feeds it to the grinding roller during the same rotation. Between the ring and the grinding ring, a dunnage layer is formed. This material layer is subjected to centrifugal force (i.e., extrusion force) outwardly by the rotation of the roller to achieve rolling.