LED companies attack the low- and medium-power market

Different from traditional thermoplastic plastic (PPA) and ceramic lead frame, EMC lead frame has better heat dissipation, high integration, can carry high current and small volume, and attract more and more people to invest in EMC lead frame development. Driven its price gradually decline.
Light-emitting diode (LED) packaging companies are struggling to enhance the competitiveness of low- and medium-power products. The shipment of low-cost direct-lit backlight modules will increase significantly in 2014, which is expected to drive the demand for low- and medium-power LEDs to rise significantly, and has attracted the expansion of LED packaging factories.
Wang Zhongwei, the chairman of the board of directors of the company, said that the production capacity of the eight-generation and above production lines of each panel factory will be opened in 2014, and mass production of larger-sized panels to digest large capacity will help stimulate large-size backlight modules. Demand is rising, and the LED packaging plant is paying considerable revenue.
Wang Zhongwei further pointed out that since the low-cost direct-lit backlight module will still be the mainstream of the LEDTV market in 2014, the backlight module factories including Ruiyi and Zhongqiang Optoelectronics are all committed to improving the shipment capacity of low-cost direct-lit backlight solutions. Therefore, the LED packaging factories such as Yiguang, Longda, Hongqi and Dongbei were encouraged to actively attack the market for medium and low power LED packages.
However, compared with the edge-lit backlight module, the low-cost direct-type backlight uses fewer LEDs, and the unit price of the low- and medium-power LEDs continues to fall, so the LED packaging factory is actively mastering the largest amount of orders, and Reduce production costs to compensate for the impact of the decline in the use of low- and medium-power LEDs.
Taking Yiguang as an example, in addition to improving the existing production equipment to increase the manufacturing speed, the company also increased the proportion of LED packages developed by the Epoxy Molding Compound (EMC) lead frame (LeadFrame).
It is understood that, unlike traditional thermoplastic plastic (PPA) and ceramic lead frame, EMC lead frame has better heat dissipation, high integration, can carry high current and small volume, etc., attracting more and more operators to invest in EMC wire. The development of the frame led to a gradual decline in its price. Wang Zhongwei revealed that at present, Everlight has up to 30 medium and low power package products for LEDTV backlights, which are produced by EMC lead frame.
Wang Zhongwei expects that although the low-cost direct-type and thin-type low-cost direct-lit LEDTV will reduce the number of low- and medium-power LEDs, after the larger-size LEDTVs will come out next year, there will be an opportunity to stimulate the demand for LED backlight modules. In this way, the company's backlight product line in 2014 is expected to maintain the same 40% of the overall revenue, and will continue to be the largest application area of ​​revenue contribution.

Semi-continuous Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Flowchat of Batch Waste Tyre Pyrolysis Plant

 

Advantages of Batch Waste Tyre Pyrolysis Plant

 

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2.  Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3.  National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5.  Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

 

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

NO.	ITEM	PROJECT
1	Equipment Model	XY-7	XY-8
2	Door Model	Full Open Door	Full Open Door
3	Suitable Raw Materials	Rubber/Plastic Products	Rubber/Plastic Products
4	Structure	Horizontal Type Revolves	Horizontal Type Revolves
5	Reactor Size	Φ2200*6000mm  Î¦2600*6600mm	Φ2200*6000mm  Î¦2600*6600mm
6	Capacity for One Batch	5-6Mt; 8-10Mt	5-6Mt; 8-10Mt
7	Oil Yield of Tires	40%-45%	40%-45%
8	Work Pressure	Normal Pressure	Normal Pressure
9	Reactor Rotation Speed	0.4R/M	0.4R/M
10	Fuels Choice	Coal, Wood	Coal, Wood, Gas, Oil
11	Power	18KW/H	18-25KW/H
12	Cooling Method	Water Cycling	Water Cycling
13	Type of Drive	External Annular Gear	External Annular Gear
14	Heating Method	Direct	Direct
15	Type of Installation	With Foundation	With Foundation/Integrated Base
16	Noise dB(A)	≦85	≦85
17	Operation Mode	Intermittent Operation	Intermittent Operation
18	Total Weight(MT)	25-40	25-40
19	Installation Space Required	30m*10m	30m*10m
20	Manpower	3~4/batch	3~4/batch
21	Shipment	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR

 

Semi-Continuous Waste Tyre Pyrolysis Plant

Semi-Continuous Waste Tyre Pyrolysis Plant,Newest Semicontinuous Used Tyre Pyrolysis Plant,Semi-Continuous Rubber Pyrolysis Plant,Practical Semi-Continuous Waste Tyre Pyrolysis Plant

Shangqiu Jinpeng Industrial Co., Ltd. , http://www.recyclings.nl