How many years will the wrecker be scrapped?

With the development of social economy, the possibility of road failures and accidents is also increasing. In order to ensure the normal operation of road traffic, certain limitations are imposed on the service life of wreckers.

In the past, any type of vehicle that was operated would be forcibly scrapped within fifteen years. From small and miniature taxis to medium-sized passenger vehicles, the number of years of scrapping will range from 8 to 15 years.

Recently, the latest regulations on the service life of wreckers have been made. Except for the compulsory retirement conditions for mileage and age, if the vehicle fails to pass the three vehicle safety technical inspection periods after the expiry of the test period, it is not eligible for inspection by the motor vehicle. The signs will also face forced scrapping. Compared with the old rules, the new rules have, to a certain extent, widened the service life of wreckers.


Butt Welding Machine Butt Welder Butt Resistance Welder Machinery Band Butt Welding Machines

Welding application range is wide, in principle can be forged metal materials can be welded with flash butt welding. For example, low carbon steel, high carbon steel, alloy steel, stainless steel and other non-ferrous metals and alloys can be welded with flash butt welding.
Welding cross-sectional area range is large, generally from dozens to tens of thousands of mm2 cross-sectional area can be welded.
Flash butt welding is widely used in welding various plate parts, pipe fittings, profiles, solid parts, tools, etc., widely used, is an economic and efficient welding method.

LZ600 wire drawing machine

1. 1 Professional and technical personnel are required to carry out installation and commissioning. Before use, it is necessary to carefully read this manual and the relevant electrical instructions provided.

1. 2 Each machine and electric control cabinet shall be reliably grounded with a grounding resistance not more than 4Ω.

1. 3 There should be no accumulated water on the table top, especially near the operation box, as it can easily lead to circuit failure due to water infiltration.

1.4 It is prohibited for multiple people to operate the same equipment at the same time to avoid accidents.

1. 5 The electric control cabinet should be placed in a clean and dry room, and the door should be closed when working to prevent dust intrusion from causing device performance degradation or failure. Air conditioning is used to maintain the ambient temperature of the electric control cabinet. Frequently check the operation of the cooling fan on the top of the electric control cabinet.

1. 6 Before starting the machine, check whether the safety device is normal.

1. 7 Do not operate the components in the electrical cabinet with power. After cutting off the main power supply, wait at least five minutes, and wait until the intermediate circuit capacitance is discharged before operating the frequency converter, motor, or motor cable.

1.8 Do not touch the IC circuits on the inverter control interface board and motor control board, as static electricity may damage these circuits.

1.9 Please provide the power supply and operating environment according to the technical requirements of Section 3.2. It is not allowed to arbitrarily change the parameters of the frequency converter and PLC. The user shall be responsible for any damage to electrical components caused by human factors.

The second Delivery inspection

2. 1. Check whether the equipment is damaged and complete upon delivery (according to the packing list). If there is any damage or inconsistency with the contract, please contact the dealer or manufacturer immediately.

2. 2 The manufacturer is only responsible for quality issues arising during production, and is not responsible for damage caused during unpacking, improper installation and use, or damage caused by overload operation.

2. 3 After unpacking, the accompanying documents should be properly kept, as they are necessary during equipment installation, commissioning, and use.


butt welding machine,butt welder,flash butt welding machinery

Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com

Posted on