Halogen Moisture Analyzer Operating Principles and Precautions

At present, there are some trace moisture meters and halogen moisture meters on the market, all of which belong to a new type of rapid moisture testing instrument. The operation of the fast moisture analyzer is relatively simple, but there are also some issues that need attention.

Part of the connection must be tightened, otherwise the problem of leakage of the reagent is likely to occur. This will directly affect the test result and cause a delay in the titration end point. In addition, when sampling, attention should be paid to the exact sampling problem. After the pick-and-place, the time for opening the reaction chamber should be shortened. In the reaction tank, the speed of delivery is best until it does not form a turbulent flow so that it can reach the end point as quickly as possible.

When titrating fast, try to shorten the experiment time, and the reaction will become slower as you approach the end point. This will increase the accuracy of the measurement. Therefore, the titration rate should preferably be set to be faster and slower afterwards. Moisture meter to avoid the electronic display when the work of the beating, when there is an abnormal phenomenon, you need to manually fast moisture analyzer, so that you can balance the pressure can be connected with the outside world.

Finally, we also need to warmly remind you that after the experiment, you must remember to empty the reagents in the system and clean them with methanol. You can't wash them directly with water because it is not easy to play and will inaccurate the next test.

The traditional moisture measurement is generally using the oven drying method. It takes two or three or four hours for a sample to be tested. It is also necessary to calculate the moisture content (moisture content) of the sample by weighing and manually calculating the balance. The inefficiency of the moisture measurement by the oven method cannot be adapted to the high-paced business production needs. Jingtai Brand JT-K Series Quick Moisture Analyzer is a newly developed high-efficiency moisture measuring instrument developed by Xingtai Jingtai Instrument Co., Ltd. and adopts a high-efficiency drying heater - high-quality circular halogen lamp for sample With rapid and uniform heating, the moisture of the sample is continuously dried. Throughout the measurement process, the instrument automatically displays the measurement results in real time: sample weight, moisture content, solid content, determination time, and heating temperature.

Halogen moisture analyzer features:

1. The unique windshield design makes the instrument weighing system more stable;

2. The water content and solid content of the sample can be converted at the same time;

3, the heating chamber using pure stainless steel chamber cover, high temperature, easy to clean.

4, uniform heating, stable performance, accurate test;

5, small size, light weight;

6, automatic measurement, measurement alarm reminder completion, the measurement process without care;

7, the use of a very wide range, almost applicable to the determination of moisture in various industries;

8. Imported sensors make the instrument test effect more outstanding and accurate;

SDDF QE series pressure filters are designed in accordance with international regulation, which consist of a Filter Housing with a screw on cover plate.

Standard equipment

-mounting holes in the filter head

-two-piece bowl for size 660 and above

-compatibility with fire-resistant fluids HFA/HFC

-drain plug with pressure relief(size 330 and above)

Connection Diagram

DF QE connection