Dcl-Mzz 24VDC Brushless Multi-Turn Electric Actuator (DCL02)

DCL-MZZ actutor can be used for multiple rotary motion and can realize the moment and close the valve, particularly suitable for small plug valve, the spiral valve hard seal valve with.



DCL-MZZ multi-turn Electric actuator (20Nm) performance parameters:

 
I. Specification
DCL-MZZ series Electric actuator is an ON/OFF , Multi-turn smart type electric actuator which powered by DC brushless motor and the control circuit adopted single chip. It provides several fault diagnosis and protection functions as well as optional control signals access functions. DCL-MZZ offers two operating models which are inching and continuous. It can be directly connect with all kinds of control system such as instrument, PC,PLC, DCS etc.
II. Main Function
1.Inching or continuous operating mode optional.
2. Torque controlling valve open/close.
3. Full-open position can be set.
4. Protection for conditions like over current or temperature exceeds , over-torque, voltage shortage.
5.Interlocking function for open and close.
 
III. Technique Date
1.      Electric level and impulse control signal.
Low level effective; low level ≤0.5V;high level ≥5V ; sink current: 10Ma.
2.      Full open or Full closed position output signal
Electric level output :DC24V, Low level effective
Drive attachment with relay: DC 24V Reply
3. Voltage:DC24V±15%.
4. Current:0.6A.
5. Torque:20Nm
6. Ambient Temperature:-25~75ºC.
7. Humidity:≤95%RH.

DCL-MZZ actutor can be used for multiple rotary motion and can realize the moment and close the valve, particularly suitable for small plug valve, the spiral valve hard seal valve with.



DCL-MZZ multi-turn Electric actuator (20Nm) performance parameters:

 
I. Specification
DCL-MZZ series Electric actuator is an ON/OFF , Multi-turn smart type electric actuator which powered by DC brushless motor and the control circuit adopted single chip. It provides several fault diagnosis and protection functions as well as optional control signals access functions. DCL-MZZ offers two operating models which are inching and continuous. It can be directly connect with all kinds of control system such as instrument, PC,PLC, DCS etc.
II. Main Function
1.Inching or continuous operating mode optional.
2. Torque controlling valve open/close.
3. Full-open position can be set.
4. Protection for conditions like over current or temperature exceeds , over-torque, voltage shortage.
5.Interlocking function for open and close.
 
III. Technique Date
1.      Electric level and impulse control signal.
Low level effective; low level ≤0.5V;high level ≥5V ; sink current: 10Ma.
2.      Full open or Full closed position output signal
Electric level output :DC24V, Low level effective
Drive attachment with relay: DC 24V Reply
3. Voltage:DC24V±15%.
4. Current:0.6A.
5. Torque:20Nm
6. Ambient Temperature:-25~75ºC.
7. Humidity:≤95%RH.

Hand Mixer With Rotary Plastic Bowl

Hand Mixer With Rotary Plastic Bowl

Hand Mixer With Rotary Plastic Bowl not only can knead the dough on tables, but also the bowl can rotary automatically, so the dougu will be kneaded more fully.

Description for Hand Mixer With Rotary Plastic Bowl

200W/250W

5 speeds

With Eject button

With two chromed beaters and dough hooks

With 2000ml plastic bowl

Carton box: 69*33*40.5cm 6pcs/ctn

20'GP: 1818pcs 40'HQ:4422pcs

Hand Mixer With Rotary Plastic Bowl,Rotary Plastic Bowl Hand Mixer,Hand Mixer With Rotary Bowl,Plastic Hand Mixer

Flying Electronic Co., Ltd , https://www.flyingappliances.com