![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
1. Adhere to the pre-class safety learning system, safety activity day system, three-level safety education system, accident analysis system and handover system, so that everyone pays attention to safety production and safe production at work.
2. The operator must firmly establish the idea of ​​safety first. Operators must wear labor protection products, comply with safety technical operating procedures and all relevant safety systems, and strictly prohibit all illegal operation.
3, it is strictly forbidden to drink after drinking and working hours, children are not allowed to enter the production site.
4. When all equipment is inspected, the switch must be transferred to the inspection position and the warning sign of “someone overhauled†should be hung.
5, adhere to the job, the equipment of this post is not allowed to be handed over to others for operation or escrow, nor is it allowed to open or stop equipment that is not in this position.
6. The driving must be fixed by personnel. The driving operators must pass the safety test and obtain the certificate before they can drive. It is strictly forbidden for non-driving operators to drive.
7. All electrical equipment should be kept free of moisture, and wet hands are not allowed to operate electrical equipment. If the electrical equipment fails, the electrician should be notified in time for processing, and other personnel must not handle it without authorization.
8. The transmission of the equipment must have a strong safety shield. All safety facilities must not be moved or removed arbitrarily. Equipment inspection or overhaul, the protective device must be moved to the original state after the event.
9, in the workplace is not allowed to fight, work hours are not allowed to leave the post, post and sleep.
10. It is not allowed to stack anything beside the electric switch. It is not allowed to grill things next to the motor. It is not allowed to cross the running equipment. It is not allowed to sleep on mechanical equipment and electrical equipment.
11. Apprentices, interns and newly transferred workers must pass the study and training, and pass the safety department assessment or pass the examination before they can operate separately. To learn the visitors, you should take the letter of introduction agreed by the relevant departments, and after passing the safety education, you will be led by a special person to enter the production site.
12. Before starting the equipment, check the equipment around to ensure that there is no obstacles and send a driving signal before driving.
JN Multifunction Alcohol Recovery Concentrator
Application
JN alcohol recovery concentrator is mainly used in traditional Chinese medicine, western medicine, glucose, oral solution, food, dairy products, starch, biological drugs and chemical industries. This alcohol recovery concentrate machine is suited to thermal sensitive vacuum concentration in low temperature and recycling organic solvent such as alcohol.
Features
1. Alcohol recovery: Alcohol recovery concentrator features large recovery capacity. This alcohol recovery concentrate machine adopts vacuum operation method and have improves its process flow. The recovery rate is amount to 95%; the loss rate of alcohol is lower than 5% and the energy consumption is 30% reduced. Alcohol recovery concentrator is an energy saving machine with small investment and high recovery benefit.
2. Liquid concentration: Alcohol recovery concentrate machine adopts external heating in natural cycling mode with vacuum negative pressure evaporating mode. It is characteristic of instant evaporation and high concentrate proportion (up to 1.4). The liquid materials are concentrated under the completely sealed status without any foam. The liquid medicine concentrated from the alcohol recovery concentrator is pollution-free and has strong flavor of medicine. This alcohol recovery concentrate machine is easy to clean and operate, small in its floor space and elegant in appearance. Besides, the heater, evaporator and heat preservation are completely equipped before leaving the factory. The material contact parts are made of stainless steels. The exterior surface adopts grinding semi-luster polishing. It is accordance with GMP medicine standard.
Vacuum Mixing Emulsifier,Square Series Vacuum Dryer,Xy-B Series Vacuum Emulsifier,Vacuum Concentrating Pot
Jiangsu Yutong Drying Engineering Co.,Ltd , http://www.ytdryer.com