Wuxi Compressor Factory's new generation of small displacement compressors

After a period of trial production, the "tin-press" new generation of small belt-driven oil-injected screw compressors entered small-scale production and was launched.

The factory code 043 series is a newly designed belt-driven air-cooled oil-injected screw compressor unit of “tin pressure”. The power of this series of units is 11～15kW, the displacement is 1.2～2.5m3/min, and the connection between the main unit and the motor. The belt type is used to make the whole unit more compact, and the unit covers an area of ​​less than 1 square meter.

The control system of the series adopts the imported control valve, which greatly reduces the connecting pipeline of the unit, reduces the fault point and leakage point of the whole system, and reduces the repair rate of the whole machine. The operation of the cooling fan of the unit is improved from the start of the old model to the control by the temperature controller, that is, the start and stop of the fan is controlled according to the exhaust temperature of the unit, energy is saved, and the noise of the unit is less than 70 decibels. Meet the requirements of green environmental protection. At the same time, through the recent sales situation, the series of units have a good sales prospects.

Air-Fluid Male Swivel Elbow - Male Thread BSPT


Cixi Air-Fluid Company 'BSPP Thread Metal Pneumatic Push In Fittings with below characteristics:


BSPP Thread Introductions : The British Standard Pipe Parallel (BSPP Threads )have the same diameter from end to end ,A parallel thread typically seals with use of an o-ring or Back Washer to seal the fittings ,no use of Anaerobe. The sealing ring (O-ring) can be easily replaced if it is damaged or hard-worn with time. Connection and disconnection of the tube can be repeated and can be performed using one hand , no other tools required .


Thread Connection : Range from BSPP 1/8" to 1/2"

Push-in Connection: Range from Inch Size 5/32" to 1/2" OD & Metric Size 04mm to 16MM

Configurations Includes: Straight , Elbow , Branch Tee ,Run Tee, Long Leg Male Elbow and Speed Control Valve .





Metal Pneumatic Push In Fittings BSPP

Metal Pneumatic Push In Fittings BSPP, Pneumatic Push In Fittings, Metal Pneumatic Fittings

Ningbo Air-Fluid Pneumatic Components Co., Ltd , http://www.air-fittings.com

Posted on