The Latest Plant Flatbed Trailer Brand New Wheels

• Model NO.: SWT-PT126
• Loading Weight: 2T
• Grade: Heavy Duty
• ABS: With ABS
• Condition: New
• Size: 3660*1830mm
• Chassis: 100X50mm Rhs
• Side: 50X50mm Steel Tube
• Spring: 7leafs
• Gvw/ATM: 3500kgs
• Transport Package: Flat Packing
• HS Code: 87161000

• Type: Full Trailer
• Certification: DOT
• Color: White
• Tire Size: 12.00-20
• OEM No: PT126
• Floor: Wire Mesh
• Axle: 63mm Solid Round Bearings
• Wheel: 7.5r16lt-14pr
• Surface Treatment: Hot Dipped Galvanized
• Trademark: SWT
• Origin: Jiangsu, China (Mainland)

BETTER PRICES,BETTER QUALITY
12*6 Plant Trailer(SWT-PT126)

  PAYMENT TERM&DELIVERY TIME
30% deposit. 70%balance will be paid after we send copy of B/L.
28 days after we get deposit.
WARRANTY
1year for trailer parts.
12 years for trailer box and drawbar and cage.
12years for trailer hot dipped galvanized.
OUR SERVICE
1.We will offer completely assembly drawing to customer after we finish loading container.
2.We will offer completely components list to customer, easy for checking quantity for trailer and trailer parts in the container.
3.We will speed post small parts to customers if any parts have problems under our warranty. We will take whole cost.
4.We will send big parts into next container if any parts have problems under our warranty. Customer also can buy the parts from local market if it is urgently and can not wait for us sending parts to them. We will take whole cost.
5.We are very happy to make some other products for our customers if they need them.
6.We can put customers good into container if they have any products from other supplier.
7.We will give very preferential policies to the customers whom do business with us more than one year. Or if you order more than 6 containers, we will help every customer start trailers business.   
 DETAIL PHOTOS

 ADVANTAGES OF SWT TRAILER
1.SWT Trailer located in the middle of Shanghai and Nanjing. 1 hour to one and half an hour from Shanghai to our city if you take high speed train. 2 hours by airplane from most city of China to Nanjing airport.
2. SWT Trailer can easily design A\a trailer for our customers according more than 12 years experience. Customers just let us know a roughly ideal and trailer capacity, then we will offer you CAD or 3d drawing for our customers check.
3. SWT Trailer offer unbeatable quality trailers and reasonable price, no matter trailer body or trailer parts, such as axle. We will not make axles by ourselves for reducing cost. We get axles from experienced axle factory which offer axles to top e brand truck factory or car factory. That means the quality is under control.
4. SWT Trailer can offer sample trailer order less than a week.
 WHY CHOOSE SWT TRAILER 
1. SWT trailer made trailers more than 12 years. We had rich experience on trailer. We know what quality trailers customers like. We know how to build a trailer with customer requirement.
2. SWT Trailer engineers had rich experience on designing trailers.
3. SWT Trailer always make high quality products.
4. Each size of SWT's trailer has a corresponding jig.
5. SWT Trailer is a manufacturer, not a trading company. 
6. SWT Trailer has western sales manager work for us, which Is easy for you to talk about business. such as NZ and Australia market. You can get quote from our factory then discuss trailer details with our western sales manager.
7. SWT Trailer will buy warehouse in Australia and set a show room In April 2015. We can show our products to customers straight way and rent warehouse to customer free in first 6 months.
WHAT'S SWT TRAILER RANGE

 

QUANTUM Bucket Elevators have successfully been installed in a wide range of applications and capacities. From process equipment, handling a few kg /hr to over 2000 t/hr with a vast range of materials. Whether your application requires a heavy-duty high capacity machine or an industrial process elevator for your factory.

We have a wealth of experience in designing the correct Bucket Elevator for your application and have a standard range of elevators, which can be specifically designed for, more specialised applications.

Our elevators have conveyed high temperature, high wear, abrasive, large lumpy, sticky non-flowing materials, as well as free flowing powders and granules. We supply a standard range of twin chain and belt elevators single or twin bucket design for high capacity applications such as grain, minerals and ore. The selection of the elevator depends on the material characteristics and IBS will be able to advise you and select the elevator most suited to your material and your application.

QUANTUM Standard Range of Elevators
• Gravity elevators
• Positive discharge elevators
• Central discharge slow speed elevators
• Centrifugal elevators

Gravity Type Bucket Elevator
Quantum supply gravity discharge elevators and positive discharge elevators, supplied as close bucket discharge type, central discharge type, or Idler wheel discharge.
Generally a slow speed design gravity bucket elevator is primarily installed for elevating large lumpy & abrasive material. Our standard units are usually chain driven, either friction drive or toothed sprocket.
These elevators offer reliability with minimum wear & a positive discharge emptying of the bucket.

Centrifugal Type Bucket Elevator
Quantum standard range of centrifugal elevators are the most common type of elevator installed to most industries supplied in both belt type or chain type depending on material characteristic and the capacity being elevated and in some case the feeding method of the elevator.
Conveying type
• Segmented tooth sprocket chain type, twin chain or single dropped forged link chain
• Friction chain type elevators, European rolled chain
• Belt elevator. Using rubber belt or 100% polyester solid woven belt, nylon and steel woven belt Typical Construction
• We supply Single leg or Double leg elevators
• Lagged Head Pulley
• Slatted return Pulley for sticky materials
• Segmented removable sprockets for chain elevators
• Segmented and removable friction pulleys for friction drive elevators
• Fabricated boot and head section assemblies
• Fabricated 3.0m long nominal casings c/w with self-supporting frame and lateral support frames
• Dust tight sealed flanges
• Screw or counterweight tail end take up
Whether the elevator is best suited for toothed sprocket design, friction wheel on conventional belt, IBS will be able to assist with correct selection for the most reliable, maintenance free and cost effective machine to suit your material characteristic and conveying capacity for your particular application.

Types of Buckets readily available
IBS Supply a range of standard off the shelf buckets in a variety of sizes and materials.
Selection of bucket type will depend on material, material characteristics and application. Typical IBS buckets would be plastic-nylon or polyurethane and can be provide FRAS, mild steel fabricated or pressed, stainless steel fabricated or pressed and wear tips for abrasive materials.

Safety and maintenance
• Our equipment is supplied mandatory with anti-roll back device in full load condition
• All inspection doors are fitted with safety limit 
• Safety factor of minimum 12: 1 to rated chain pull to installed chain or belt pull under full load stall conditions

For some materials and specific applications, Quantum will design in accordance with Australian standards, suitable explosion venting and will design the structure of the elevator to suit the required application. Typical material that requires this consideration would be sugar, flour, grain and coal.

Standard features for all our bucket elevators

• Qty2 1000mm long inspection doors in conveyor leg and return leg in twin leg elevators for easy inspection of belt or chain and replacement of buckets. Inspection hatch will be provided with bolted mesh screen and safety limit switch

• Qty 2 inspection doors in head section, fitted with safety limit switch
• Fully removable split head top section.
• Clean out and inspection doors in Boot section. Self-cleaning boot section optional.
• Under speed sensor and flag disc

• Belt tracking sensor or switch for belt Bucket Elevators

Design Criteria for IBS Bucket Elevators
• All our equipment is designed to meet Australian Standards
• Selection of correct conveying velocity and material trajectory for centrifugal elevators is critical to the successful operation of a bucket elevator
• Standard wear plates on boot in-feed and head chute discharge.
• Designed to operate no more than 70% water level of selected bucket at normal operation.
• Installed power capable of full load start up under full bucket surge capacity.
• Our bucket elevators are designed for dust tight design, with suitable dust extraction points
• All our bucket elevators are designed to be self-supporting and are provided with lateral support bracing at approx. 10m centres

Replacement parts service
We can provide a range of standard bucket elevator parts using our standard head and Tail Pulley assemblies, conveyor belting, elevator butt straps, conveyor bolts and fittings, belt-splicing fittings.

Coupled with our range of standard steel and plastic buckets, elevator chain and fittings, belt tracking switches and sensors we will keep your business moving--

After sales support
Quantum can provide a customised service contract using experience technicians with many years` experience in servicing and troubleshooting bucket elevators in most states. This service ensures that your equipment is functional to its optimum capabilities and reduces down time parts replacement and potential damage.Our technicians have standard customer maintenance, checking and reporting procedure.

Bucket Elevator

Bucket Elevator,Bucket Conveyor,Elevator Conveyor,Vertical Conveying Elevator

Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.quantum-sino.com