Submersible Pump for Dirty Water (CE Approved)

Dirty Pump:
Condition of usage:
1. Maximum operating depth 5m below water level
2. The trans medium's temperature shouldn't be higher than 40C
3. Trans medium's pH: 4~10
4. Kinematics viscosity of the trans mediumis: 7X10-7~23X10-6m2/s
5. Density of the trans medium Limit: 1200kg/m3

Function and feature:
It can work safely and efficiently at high flux with the feature of complete heads. The design is designed to a wide tunnel which helps to convey the long fiber liquid or the solid whose diameter is about 15mm. The selection of bottom suction structure, stainless steel and special cast iron made the pump have the capabilities of complete drain and high resistance of abrasion and corrosion. The float switch can automatically control on and off with the change of the liquor level. The protector in the motor can automatically cut off power when it overheated or overcurrented, thus guarantee the security and reliability of pump's run even in the atrocious environment.

Clean pump:
Condition of usage:
1. The depth for the electrical pump below the water is no more than 5m
2. The temperature of the water is no higher of 40C
3. The pH figure of the water is between 6.5-8.5
4. The grain diameter of the solids in the water is no bigger than 0.2mm

Function and feature:
Series model JPS stainless steel casing housing submersible electirc pump is vastly used for the drainage of such places as gardening file., my enterprises, construction site, breed aquatics industry, farming and family. The pump boasts the abilities of completer drainage and convenient use. The housing, sieve and rotor shaft are made of stainless steel and the body of the pump is chrome plated by cast iron, both of them provide the product a nice appearance and high resistance to abrasion and corrosion. ( It looks like a complete stainless steel submersible pump, but sold at the price of only 50% of that of the model SPSN). The floast switch can automatically control on and off with the change of the liquor level. The protector in the motor can automatically cut off the power when it overheated or overcurrentd, thus guaranteet the security and reliability of pump's operation even in the atrocius enviornment.




220V/50Hz, 230V/50Hz, 110V/60Hz & 115V/60Hz models are available on request Dirty Pump:
Condition of usage:
1. Maximum operating depth 5m below water level
2. The trans medium's temperature shouldn't be higher than 40C
3. Trans medium's pH: 4~10
4. Kinematics viscosity of the trans mediumis: 7X10-7~23X10-6m2/s
5. Density of the trans medium Limit: 1200kg/m3

Function and feature:
It can work safely and efficiently at high flux with the feature of complete heads. The design is designed to a wide tunnel which helps to convey the long fiber liquid or the solid whose diameter is about 15mm. The selection of bottom suction structure, stainless steel and special cast iron made the pump have the capabilities of complete drain and high resistance of abrasion and corrosion. The float switch can automatically control on and off with the change of the liquor level. The protector in the motor can automatically cut off power when it overheated or overcurrented, thus guarantee the security and reliability of pump's run even in the atrocious environment.

Clean pump:
Condition of usage:
1. The depth for the electrical pump below the water is no more than 5m
2. The temperature of the water is no higher of 40C
3. The pH figure of the water is between 6.5-8.5
4. The grain diameter of the solids in the water is no bigger than 0.2mm

Function and feature:
Series model JPS stainless steel casing housing submersible electirc pump is vastly used for the drainage of such places as gardening file., my enterprises, construction site, breed aquatics industry, farming and family. The pump boasts the abilities of completer drainage and convenient use. The housing, sieve and rotor shaft are made of stainless steel and the body of the pump is chrome plated by cast iron, both of them provide the product a nice appearance and high resistance to abrasion and corrosion. ( It looks like a complete stainless steel submersible pump, but sold at the price of only 50% of that of the model SPSN). The floast switch can automatically control on and off with the change of the liquor level. The protector in the motor can automatically cut off the power when it overheated or overcurrentd, thus guaranteet the security and reliability of pump's operation even in the atrocius enviornment.




220V/50Hz, 230V/50Hz, 110V/60Hz & 115V/60Hz models are available on request

Die Casting CNC

The die casting process involves the use of a furnace, metal, die casting machine, and die.
The metal, typically a non-ferrous alloy such as aluminum, is melted in the furnace and then injected into the dies in the die casting machine. After the molten metal is injected into the dies, it rapidly cools and solidifies into the final part, called the casting.
The castings that are created in this process can vary greatly in size and weight, ranging from a couple ounces to 100 pounds. One common application of die cast parts are housings - thin-walled enclosures, often requiring many ribs and bosses on the interior.
Metal housings for a variety of appliances and equipment are often die cast.
Several automobile components are also manufactured using die casting, including pistons, cylinder heads, and engine blocks. Other common die cast parts include propellers, gears, bushings, pumps, and valves.

Die Casting Cnc,Cnc Die Casting,Cnc Lathe Machining,Aluminum Die Casting

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.sunleeelectric.com