15 tons of tank trucks use professional heat exchangers to accelerate oil discharge

The 15 ton tanker approved for 15 ton capacity is a large-scale work vehicle. It can carry up to 15 tons of various types of oil at a time. However, during the long-term transportation of oil products, there will be a problem. Because of the viscous deposit of the oil itself, or due to the influence of the outside world's lower temperature, the oil in the tank is often more viscous and the fluidity is greatly reduced. When the oil is drained, it is difficult to release the oil from the oil. In this case, the tanker now needs to be loaded with a dedicated local refueling tanker, which can quickly heat up the tank for local treatment, thus allowing the oil to resume high fluidity.

How does this fast accelerator work? In a 15 ton oil tanker, a vortex heat film heat exchanger is usually installed. It is placed directly along the bottom of the oil tank. High heat steam flows through the heat exchanger and passes through the steam. The continuous flow inside, effectively recovers the fluidity of the oil inside the tank, allowing the viscous oil to flow again.

And this kind of heat exchanger has a special temperature control valve, which can effectively measure the temperature of the oil inside the oil tank through the above temperature sensor effectively, effectively allowing everyone to control the temperature at the oil outlet. The oil temperature can be effectively stabilized.

15吨油罐车使用专业换热器加速放油

After using such a heat exchanger, the oil output of a 15 ton tanker can be made simpler and more convenient. In particular, the heat exchanger has a high heating speed and a high heat transfer efficiency. Grease is very convenient to use. In particular, it can be heated quantitatively to control the temperature, heating, how long it takes, and how long it takes to refuel, can be manually operated, so that everyone can need how much to heat, very convenient, The temperature control also avoids the occurrence of local excessively high temperatures and charring problems in the tank, and better guarantees that the quality of the oil is not affected.


Metal stamping AMPLIFIERS Metal Chassis & Panel

Timeplex` customers rely on our expert design and development services for variety of components, ranging from micro-miniature parts to large, intricate components. We can provide prototyping services to facilitate high volume orders of up to 80 million parts.
Components we produce through our custom precision metal stamping include:

AMPLIFIERS metal chassis


• Electronic connectors
• Sensor components
• Thrust washers
• Surface mount pins
• Transfer stampings
• Heat sinks
• Printer cartridge blades
• Medical components
• Insert moldings
• Fuse clips
• Furniture parts
• And more.


More services we offer:

Besides of Metal Stamping Components, we also complete solution for OEM/ODM Products & components, offer services of deep drawing services, EMI metal shielding parts, heat sink ,plastic molding products for custom, Plastic Injection Components, Metal Stamping Parts, home appliances accessories ,R/C drone and smart electronic toys etc.

Our advanced equipments, professional engineers ,high quality system, enable us to provide high quality with low production cost Based on our strength, passion and capacity, we devote to supply one-stop service to customers.


Amplifiers Metal Panel



Amplifiers Metal Chassis Panel,Amplifiers Metal Stamping Panel,Amplifiers Metal Stamping Base,Amplifiers Metal Panel

Timeplex Industrial Limited , https://www.catimeplexhk.com

Posted on