1.Smart appearance,save the space
 2.Proximity transducer is flush mounted inside sensor groove,prevent sensor from mechanical damage
 3.Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation
 4.Good replacement for the FESTO same type.
Note:ADVU series Cylinder With 100mm bore size is under designing,not available this time.ISO21287 standard ADVU series Pneumatic Air Cylinder
Features:
1) Bore size: 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, and 100mm
2) Acting type:Â double acting or single acting
3) Material: aluminum
4) Seals: NBR
5) Rod end thread type: internal thread, external thread or NO thread
6) Working pressure:0.1~0.9MPa
7) Working temperature: 0~70C
8) Port connection size: M5, G1/8", G1/4", G3/8"
Bore(mm) | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
Action | Double acting, single rod/double rod | |||||||||
Fluid | Filtered compressed air | |||||||||
Ensured Pressure Resistance | 1.5MPa | |||||||||
Operating pressure range |
ADVU - -P-A | 0.12~1.0MPa | 0.1~1.0MPa | 0.08~1.0MPa | 0.06~1.0MPa | |||||
ADVU - -P-A-S2 | 0.13~1.0MPa | 0.12~1.0MPa | 0.1~1.0MPa | 0.8~1.0MPa | ||||||
Ambient and fluid temperature | -20~80 (No freezing) | |||||||||
Port size | M5 | G1/8" | G1/4" | |||||||
Piston rod thread | Female thread | M4 | M5 | M6 | M8 | M10 | M12 | |||
Male thread | M8 | M10×1.25 | M12×1.25 | M16×1.5 | M20×1.5 | |||||
Cushion | Rubber bumper |
Other Compact/Thin Cylinders are also available for you:
SDA series Thin Cylinder
CQ2 series Compact Cylinder
Our company also can provide other pneumatic cylinders as below,
1. ISO Standard cylinder: DNC(ISO 6431&VDMA24562),DNG(ISO 15552),SI(ISO 6431),MA(ISO 6432)
2.Standard cylinder:SC/SU,MB,CA1
3.Mini cylinder:MA,MAL,CJ2,CM2,CJP
4.Double-shaft cylinder:TN,CXS
5.Free installation cylinder:CU
6.Slide bearing cylinder:STM
7.Three-shaft cylinder:MGP
8.Stopper cylinder:RSQ
9.Clamp cylinder:XCK
10.Rotary cylinder:MSQ
11.Rodless cylinder:CY1
12.Air gripper:XHZ2/XHC2,XHL2,XHT2
More information and details,you can contact us and visit our website.
If you have the nonstandard products want to design,don't hesitate to contact us.
Â
Â
  1.Smart appearance,save the space
 2.Proximity transducer is flush mounted inside sensor groove,prevent sensor from mechanical damage
 3.Extra buffering ring at terminal place can absorb residual energy of movement at a high speed and machine circulation
 4.Good replacement for the FESTO same type.
Note:ADVU series Cylinder With 100mm bore size is under designing,not available this time.ISO21287 standard ADVU series Pneumatic Air Cylinder
Features:
1) Bore size: 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 80mm, and 100mm
2) Acting type:Â double acting or single acting
3) Material: aluminum
4) Seals: NBR
5) Rod end thread type: internal thread, external thread or NO thread
6) Working pressure:0.1~0.9MPa
7) Working temperature: 0~70C
8) Port connection size: M5, G1/8", G1/4", G3/8"
Bore(mm) | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
Action | Double acting, single rod/double rod | |||||||||
Fluid | Filtered compressed air | |||||||||
Ensured Pressure Resistance | 1.5MPa | |||||||||
Operating pressure range |
ADVU - -P-A | 0.12~1.0MPa | 0.1~1.0MPa | 0.08~1.0MPa | 0.06~1.0MPa | |||||
ADVU - -P-A-S2 | 0.13~1.0MPa | 0.12~1.0MPa | 0.1~1.0MPa | 0.8~1.0MPa | ||||||
Ambient and fluid temperature | -20~80 (No freezing) | |||||||||
Port size | M5 | G1/8" | G1/4" | |||||||
Piston rod thread | Female thread | M4 | M5 | M6 | M8 | M10 | M12 | |||
Male thread | M8 | M10×1.25 | M12×1.25 | M16×1.5 | M20×1.5 | |||||
Cushion | Rubber bumper |
Other Compact/Thin Cylinders are also available for you:
SDA series Thin Cylinder
CQ2 series Compact Cylinder
Our company also can provide other pneumatic cylinders as below,
1. ISO Standard cylinder: DNC(ISO 6431&VDMA24562),DNG(ISO 15552),SI(ISO 6431),MA(ISO 6432)
2.Standard cylinder:SC/SU,MB,CA1
3.Mini cylinder:MA,MAL,CJ2,CM2,CJP
4.Double-shaft cylinder:TN,CXS
5.Free installation cylinder:CU
6.Slide bearing cylinder:STM
7.Three-shaft cylinder:MGP
8.Stopper cylinder:RSQ
9.Clamp cylinder:XCK
10.Rotary cylinder:MSQ
11.Rodless cylinder:CY1
12.Air gripper:XHZ2/XHC2,XHL2,XHT2
More information and details,you can contact us and visit our website.
If you have the nonstandard products want to design,don't hesitate to contact us.
Â
Â
FFP2 mask is one of the European mask standard EN149:2001. Its function is to absorb harmful aerosols, including dust, smoke, mist, poisonous gas and poisonous vapor, etc. through the filter material, blocking it from being inhaled by people.
FFP1: The minimum filtering effect is 80%
FFP2: The minimum filtering effect is 94%
FFP3: The minimum filtering effect is 97%
The filter material of FFP2 mask is mainly divided into four layers, namely two layers of non-woven fabric + one layer of meltblown fabric + one layer of needle punched cotton.
Disposable Protective Face Shield,Disposable Safety Face Mask,Reusable Protective Face Mask,Electronic Face Mask
Sung Precision Mould & Plastic Co., Ltd. , https://www.dginjectionmolding.com