Components for the Machine:
The roll forming machine consists of 8-ton hydraulic uncoiler, infeed guide, embossing rollers, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table.
Material Specification | Aluzinc steel and galvanized steel. |
Thickness | WLFM51-326.5-980, 0.75 mm to 1.5mm; WLFM75-300-900, 0.75mm to 1.50mm. |
Main Motor Power | 22kw (two sections of machine, each secton has one motor with 11kw). |
Hydraulic Station Power | 7.5kw. |
Feeding Width | 1000mm |
Cover Width | 800mm |
Steel Stress | G450 ~ G550. |
Roll Forming Speed | 12 m/minute. |
Cutting Tolerance | +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm). |
Hydraulic Uncoiler | Max. capacity: 8'000kgs. |
Coil Inner Diameter | 508mm. |
Voltage | As per customer's request. |
Numbers of Stations | 26 stations |
Type of Cutting | Roll-formed and length-set profile cutting. |
Process Sketch
Uncoiling the sheet -Infeed guiding -Roll forming -Measure length - Cutting the panel - Panels to the supporter (option: automatic stacker).
Standard Equipment of Machine
Â
1) | Manual Uncoiler | 1 set |
2) | Infeed Guide | 1 set |
3) | Embossing Roller | 1 set |
4) | Roll Forming Station | 1 set |
5) | Post-cut Equipment | 1 set |
6) | Hydraulic Station | 1 set |
7) | PLC Control Console | 1 set |
8) | Product Support Table | 2 sets |
9) | Spare Parts | 1 box |
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;Â
3.Spare parts and some small parts packed in plastic tooling box;Â
4.All Components Fixed by steel wire with Container.
Â
FAQ
- Q:Are you a manufacturer?
- A:Yes absolutely. Welcome a lot for your visiting to us.
-
Q:What's the delivery time?
A:Normaly will take 60days
-
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.Â
-
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
-
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.
Application: Work rolls for early finishing stand and late finishing stand (hot strip mill, hot plate mill, continuous hot strip mill, heavy plate mill).
Material: High chromium, high speed steel, high nickel chromium, indefinite chilled cast iron or as per the customer`s requirement.
Barrel diameter: 1500mm maximum
Unit weight: 25mt/pc
Type: Single rolls, double pouring cast rolls.
Casting method: Static casting, centrifugal casting
Heat treatment: annealing, normalizing, quenching, and tempering.
Finishing Rolls
Finishing Rolls,Indefinite Chilled Cast Iron Rolls,Enhanced Rolls,High Nickel Chromium Rolls
Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd , http://www.bkdrtech.com