![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
On June 5th, Dongming Petrochemical produced 30,000t/y sulphur yellow and acidic water stripper to produce the first batch of liquid sulphur products.
The project is an environmental protection project with a total investment of 50 million yuan. Construction started in June 2007 and construction was completed by the end of May this year. The device entered the start-up procedure in May: the oven was conducted from May 15th to 28th; it entered the stage of single trial run of the pump on May 19th; and the device was purged and tested on May 22~24; May 25~ On the 27th, the device was flushed with water; on May 29, the lining of the oven was checked; the catalyst was installed on May 30; the raw material was introduced into the device at 16:30 on June 5, and acid steam was introduced at 17:30. Sulfur furnace equipment, 19:10 production of the first batch of liquid sulfur. At present, the device is running normally and the production is stable. The company is strengthening the optimization operation and adjusting the parameters to ensure that the product quality is fully qualified.
The project is an environmental protection project with a total investment of 50 million yuan. Construction started in June 2007 and construction was completed by the end of May this year. The device entered the start-up procedure in May: the oven was conducted from May 15th to 28th; it entered the stage of single trial run of the pump on May 19th; and the device was purged and tested on May 22~24; May 25~ On the 27th, the device was flushed with water; on May 29, the lining of the oven was checked; the catalyst was installed on May 30; the raw material was introduced into the device at 16:30 on June 5, and acid steam was introduced at 17:30. Sulfur furnace equipment, 19:10 production of the first batch of liquid sulfur. At present, the device is running normally and the production is stable. The company is strengthening the optimization operation and adjusting the parameters to ensure that the product quality is fully qualified.
Modular sanding station can be widely used in 3c electronic products, household and sanitary ware, traffic and transportation, auto parts accessories, aerospace workpiece and millling workpiece precision fields.It has all the characters of Force Control System, or active contact flange, Constant Force Actuator---flexible control, quick reponse, instant adjusting.
Modular sanding station, sanding force control system, sanding active contact flange, sanding constant force actuator
DARU Technology (Suzhou) Co., Ltd. , https://www.szconstantforceactuator.com