Application Technology and Effect of Coal Seam Water Injection in Coal Mine Safety

1, the coal layer and the water method

The coal seam water injection is to drill some holes in the coal seam before mining, and inject the pressure water into the coal body through the drilling, destroying the balance of the original coal-gas two-phase system in the coal body, forming coal-gas-water three The phase system, the interaction of various media in the system, changes the physical and chemical properties, mechanical properties and thermodynamic properties of coal.

The coal seam water injection is divided into deep hole water injection and shallow hole water injection according to the drilling depth. The deep hole water injection is in the wind inlet lane or the return air lane in front of the working face, and the hole is inclined parallel to the working surface along the coal seam. The hole depth is generally 2/3 of the working face oblique length, and the hole diameter is 75-100 mm. After sealing with a cement slurry or a rubber sealer, water injection can be started. Compared with shallow hole water injection, deep hole water injection cost is higher, drilling is more difficult, only suitable for medium and thick coal seams. The advantage is that the pre-wet range is large, it can be fully wetted, and it does not affect the coal mining work. However, in some mining areas, water injection is difficult and the amount of water injection is small because the coal seam is not damaged.

2. Mechanism and effect of coal seam water injection in coal mine safety

2.1 Dustproof

Coal seam water injection is the most effective dust prevention measure for mining face. The dust removal mechanism of water includes the following three aspects:

(1) The primary coal dust in the wet coal body, so that it loses its ability to fly;

(2) effectively wrapping each small part of the coal body to avoid the flying of fine coal dust when the coal body is broken during mining;

(3) The wetting effect of water makes the coal body plastically enhanced and the brittleness is weakened. When the coal body is subjected to an external force, many brittle fractures become plastic deformation, thereby greatly reducing the possibility that the coal body is broken into dust particles and reducing the amount of coal dust generated.

After the coal injection was carried out in the Xinwen Suncun Mine and the Benxi Caiyu Mine, the dust removal rates reached 73% and 79% respectively. Table 1 shows the dust reduction rate of the “three soft” fully mechanized caving face through the implementation of coal seam water injection and other dust prevention measures.

Table 1 "Three soft" fully mechanized caving face dust falling rate

position	Shearer driver	Transfer driver	Coal driver	Return air alley
Full dust /%	69.1	44.2	84.1	69.4
Absorbent dust /%	42.3	41.2	66.9	45.3

2.2 Prevention of coal and gas outburst

Research and experimental investigations show that the wetted coal body can significantly change the mechanical properties of coal, the elasticity and strength of coal decrease, and the plasticity increases, so that the pressure distribution in front of the roadway changes, that is, the high pressure to the deep part of the coal body. Transfer, the pressure concentration factor is reduced. After the coal body is wet, its gas permeability will also be reduced by hundreds of times. The water has a significant hindrance effect on the movement of gas. The gas emission and the gas discharge rate in the coal are greatly reduced. The above various changes indicate that the water injection wet coal can eliminate or reduce the prominent danger of the coal seam. After the six fully mechanized mining faces with prominent dangers in the two pairs of prominent mines in No. 3 coal seam of Yangquan mining area were filled with shallow-hole coal wall, the number of gas outbursts and discharges was reduced by 72.2% compared with that before use, and the average protruding strength was reduced. Also reduced by 36.5%.

Crane Scale

Crane scale :

Electronic crane scale OCS introductions:

We supply wireless electronic crane scale and LED display crane scale.

These flexible crane scales make it easy to measure suspended loads.

Designed with safety in mind, each scale features a standard remote control that allows operation at a safe distance.

The rotating hook with safety catch ensures stability and keeps the suspended item securely in place.

High-contrast red LED display and indicators are easy to read in any lighting conditions.

A handy hold function keeps the reading visible on the display after the weight is removed, allowing the operator to safely record the weight.

Each model offers a built-in rechargeable battery, which allows the scale to be used in areas where power is not available.

Equipment has been a world-class scale and balance manufacturer for more than 40 years.

Trust us to bring you quality products with a wide range of features to handle a variety of applications

Digital wireless crane scale

Specification:

Product Name	Wireless 2T To 15T OCS Crane Scale
Item No.	OCS-WZ-3T
Item Type	Digital Wireless Crane Scale
Brand Name	Uniweighty
Material	Die-casting aluminum alloy, 360 rotatable cast-iron hook
Weight units	kg
Max capacity	3t
Min capacity	20kg
Division	1kg
Display	LED display with red word
Battery	Rechargeable battery
Battery life	3 years
Accuracy class	OIML III
Tare Range	100% max capacity
Rated Load	3000kg
Saving temperature	-25℃~55℃
Working humidity	10%-80%RH
Max. safety overload	100% max capacity
Ultimate overload	200% max capacity
Stable time	<=10s
Power supply	AC: 220V 50HZ; DC: 4V/4mA
Warm up	10-15 min
Function	Zero setting, tare, weight accumulation, counting

Capacity & Division

Model	OCS-WZ-2T	OCS-WZ-3T	OCS-WZ-5T	OCS-WZ-10T	OCS-WZ-15T
Max Capacity	2000kg	3000kg	5000kg	10000kg	15000kg
Min Capacity	10kg	20kg	40kg	80kg	120kg
Division	1kg	1kg	2kg	5kg	5kg

Product Name	OCS Portable Industrial Electric Crane Scale
Item No.	OCS-3T
Item Type	Digital Crane Scale
Brand Name	Uniweighty
Material	Die-casting aluminum alloy, 360 rotatable cast-iron hook
Weight units	kg
Display	LED display with red word
Battery	Rechargeable battery
Battery life	3 years
Accuracy class	OIML III
Tare Range	Max capacity
Rated Load	3000kg
Operating temperature	-10℃~40℃
Working humidity	10%-80%RH
Max. safety overload	100% max capacity
Ultimate overload	151% max capacity
Stable time	<=10s
Load cell	AC: 220V 50HZ; DC: 4V/4mA
Function	zero setting, tare, weighing accumulation, counting

We promise the best technical and application advice to insure that your hoist purchase will meet your need.

1 year of after-sale service!

OEM your electric chain hoist is highly welcomed.

Your business relationship with us will be confidential to any third party

if more information needed ,please feel free to send e-mail at :rebecca at hoist-cranes dot com

Your attention will be highly appreciated!

Our Services

1.Client

We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.

2. People

We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.

3. Product

Our products are of HIGH quality standards and always come with certificate of compliance by the manufacturers.

4. Performance

We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.

5. Free sample and OEM service

We can provide free samples to you and we also have OEM service, we can put your logo on the label and the information you need on the webbing too.

Electronic Crance Scale,Digital Crane Scale,Crane Lifting Scale,Diecast Scale Crane

Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggingfactory.com