31300 Series Truck Bearing Tapered Roller Bearing

XSY BEARING

1. XSY bearing Co., Ltd. has its own factory. We make sure to offer you the most competitive price.
2. XSY bearing Co., Ltd. has a professional R&D team and an after-sale team, so what you buy is top-end, and what you use is quality & service guaranteed.
3. XSY bearing Co., Ltd. is a bearing manufacturer since 1990. Rich experience makes us more professional.
4. The bearing is long durability, high speed and low noise.
5. OEM & ODM are available.
6. All kinds of bearing simples are available. 

ABOUT TAPERED ROLLER BEARING
The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, eliminating sliding motion in the bearing.

This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. When a roller slides rather than rolls, it can generate wear at the roller-to-race interface, i.e. the differences in surface speeds creates a scrubbing action. Wear will degenerate the close tolerances normally held in the bearing and can lead to other problems. Much closer to pure rolling can be achieved in a tapered roller bearing and this avoids rapid wear.

The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum.

The larger the half angles of these cones the larger the axial force that the bearing can sustain.

Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the cone, and the outer ring is called the cup. Internal clearance is established during mounting by the axial position of the cone relative to the cup.

 

XSY BEARING

Contact us

 

XSY BEARING

1. XSY bearing Co., Ltd. has its own factory. We make sure to offer you the most competitive price.
2. XSY bearing Co., Ltd. has a professional R&D team and an after-sale team, so what you buy is top-end, and what you use is quality & service guaranteed.
3. XSY bearing Co., Ltd. is a bearing manufacturer since 1990. Rich experience makes us more professional.
4. The bearing is long durability, high speed and low noise.
5. OEM & ODM are available.
6. All kinds of bearing simples are available. 

ABOUT TAPERED ROLLER BEARING
The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing. This geometry makes the motion of the cones remain coaxial, eliminating sliding motion in the bearing.

This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. When a roller slides rather than rolls, it can generate wear at the roller-to-race interface, i.e. the differences in surface speeds creates a scrubbing action. Wear will degenerate the close tolerances normally held in the bearing and can lead to other problems. Much closer to pure rolling can be achieved in a tapered roller bearing and this avoids rapid wear.

The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum.

The larger the half angles of these cones the larger the axial force that the bearing can sustain.

Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the cone, and the outer ring is called the cup. Internal clearance is established during mounting by the axial position of the cone relative to the cup.

 

XSY BEARING

Contact us

 

Rubber casters are one kind of casters. The products are divided into rubber casters, polyurethane casters and metal casters. Materials: natural rubber, fluorine rubber, silicone rubber, polyurethane and so on.

Rubber casters are earth-rolling circular elastic rubber wheel products assembled on various vehicles or machinery, usually installed on the metal rim, with supporting the body, cushion the external impact, reduce vibration, reduce temperature and other functions.

Middle Heavy Duty Casters With Rubber Wheels

Small Caster Wheels,Heavy Duty Off Road Casters,E27Heavy Duty Pneumatic Casters,Heavy Duty Threaded Stem Casters

Kaiping City Sunnywah Electronic CO.,LTD , https://www.knightcasters.com