What are the wiring methods for explosion-proof platform lights?

There are 4 steps in the wiring method of the explosion-proof platform lamp , as follows:

1. First choose the appropriate installation method.

2. Determine the installation position of the explosion-proof platform lamp, lay the steel pipe, and prepare the three-core cable wire of the corresponding length to be worn in the steel pipe. The cable should be exposed to a steel pipe of about 90 mm, and the cable at the front of the cable should be stripped 40 mm to expose the internal wires.

3. Pass the cable through the nut connector, gasket, seal ring and the top cover, and use the wrench to clamp the wrench on the nut connector. Tighten the nut connector to ensure the inside of the cap. The cable sealing ring is fully compressed. After tightening, the nut connector can only expose one or two buckles of the top cover. Then connect the steel pipe to the nut connecting piece, and use a wrench to clamp the wrench on the nut connecting piece to tighten the steel pipe, and tighten the steel pipe with the M4 screw on the nut connecting piece.

4. Use a hex wrench to loosen the screw on the top of the top cover, open the pressure plate of the fixed top cover, open the top cover, and introduce the three-core cable into the lamp cavity for wiring. Then tighten the crimping screw, close the top cover, and tighten the upper screw.

Underbody Structural Parts Of Rail Car Body

Most of the structural parts in this category are small, medium and large parts, which are mainly installed at the bottom of the car body to improve the bottom structure of the car body. All of them are metal products, and the materials are mostly aluminum alloy and stainless steel. They are painted or coated according to requirements The company is the source manufacturer, non-standard customization, most of the products can be customized in size and shape.

Jilin Zexin Industrial Development Co., Ltd. was founded in 2001 with a registered capital of 5 million RMB and is a high-tech enterprise in Jilin Province. There are about 100 employees, and the company's sales volume reached 20 million RMB in 2022. The company has more than 30 sets of various equipment including 2 NC laser cutting machines, 6 NC machining centers, 8 welding machines for different purposes, NC cutting machines, NC bending machines and others. After more than 20 years of construction and development, it has formed a comprehensive enterprise of electrical system, carbon steel, stainless steel and aluminum alloy stamping, welding, machining and surface coating. The company has passed the ISO9001:2015 quality management system certification, EN15085 CL1 welding system certification, American standard AWS welding certification, and ISO/TS22163:2017 quality management system certification. It is a high-quality supplier cooperated by CRRC Changchun Railway Vehicles Co., Ltd., the core manufacturer of China's urban rail transit equipment and high-speed train.

Underbody Structural Parts Of Rail Car Body,Single Hole Single Tube Buckle,Single Hole Double Tube Clamp,Large Metal Reinforcement Board

Jilin Zexin Industry Development CO., LTD. , https://www.jilinzexin.com