Triple Eccentric Double Flanged Butterfly Valve

Metal Seated Triple Eccentric Flanged Type Butterfly Valve with Gear

A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favored because they are lower in cost to other valve designs as well as being lighter in weight, meaning less support is required. The disc is positioned in the center of the pipe, passing through the disc is a rod connected to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Unlike a ball valve, the disc is always present within the flow, therefore a pressure drop is always induced in the flow, regardless of valve position.
A butterfly valve is from a family of valves called quarter-turn valves. In operation, the valve is fully open or closed when the disc is rotated a quarter turn. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the fluid. The valve may also be opened incrementally to throttle flow.
There are different kinds of butterfly valves, each adapted for different pressures and different usage. The zero offset butterfly valve, which uses the flexibility of rubber, has the lowest pressure rating. The high performance double offset butterfly valve, used in slightly higher-pressure systems, is offset from the centre line of the disc seat and body seal (offset one), and the centre line of the bore (offset two). This creates a cam action during operation to lift the seat out of the seal resulting in less friction than is created in the zero offset design and decreases its tendency to wear. The valve best suited for high-pressure systems is the triple offset butterfly valve. In this valve the disc seat contact axis is offset, which acts to virtually eliminate sliding contact between disc and seat. In the case of triple offset valves the seat is made of metal so that it can be machined such as to achieve a bubble tight shut-off when in contact with the disc.

Standards
Technical Specifications
Main Parts & Materials
Company Overview
Zhejiang Wenbao Valve Co.,Ltd was established in 1985. The main products range are as following: Fully Welded Ball Valve,1PC/2PC/3PC Flanged Ball Valve, Threaded Ball Valve, Mini Ball Valve, High Pressure Ball Valve, Pneumatic Ball Valve, Electric Ball Valve, Sanitary ball valve, Ball valve with mounting pad and other valves like gate, globe, check valves and Strainer, etc. Main material include: Stainless steel, Cast Steel, Forged Steel and Brass, etc. The products manufactured as per API, ANSI, JIS, ISO, BS, JB and GB, and have CAD valve design and quality testing center. The products are widely used in chemical industry, oil, metallurgy, light industry, electric power, food, pharmacy, civil industry, fiber industry, liquefied natural gas, liquefied petroleum gas, steel mills, heating pipes, etc. Our company passed the ISO 9001:2008, Standards Organization of Nigeria(SON), International Quality Award Certificate, Manufacture License of Special Equipment, KC of South Korea,CE of Europe, etc.

Plasma Parts

Consumables
Torch bodies, torch tips and nozzles, electrodes, shield cups
Transfer ball bearings, torch holders, torch shields, air filter elements
Gears, drive belts, shafts bearings
Parts for Thermal Dynamics, Hypertherm, ESAB, Lockformer Vulcan, Vicon, Cybermation
Production Products Inc. stocks and sells most common parts used for plasma cutting including torch tips, torch electrodes, torch bodies, torch leads, hand torches and machine torches.

We also offer replacement torch bodies and leads; for example, a change of torch lead and torch body from Hypertherm to Thermal Dynamics Cutmaster may mean better tip life at lower prices.

We also have the most common mechanical parts for your Cnc Plasma machine: torch shields, transfer ball bearings, drive shafts and bearings, spur gears and timing belts.

REPLACE your PLASMA POWER SOURCE

Production Products offers parts, repairs and replacements for plasma power source units. We can match a customer’s needs to the latest in plasma technology with the new CUTMASTER SERIES of solid state plasma units from the leading company in the industry, Thermal Dynamics

Plasma Parts,Plasma Cutter,Plasma Cutter Parts,Plasma Cutter Accessories,nozzels and electrode

JINAN XUANLIN MACHINERY CO., LTD. , https://www.cncxuanlin.com