The profit growth of the pharmaceutical industry is weak

An analysis report released by the National Development and Reform Commission on the health status of the pharmaceutical industry this year shows that medical production and sales have maintained rapid growth in the first quarter of this year, but the growth in industry efficiency has been sluggish, and profit growth has fallen sharply.
Price cuts and cost increases are the main reasons for the decline in profits
The report proposes that since the beginning of this year, the pharmaceutical industry has realized a total output value of 113.4 billion yuan and a total profit of 7.89 billion yuan, a year-on-year increase of only 6.3%. The growth rate has dropped sharply and dropped to a record low. However, medical equipment and equipment, Chinese Herbal Medicine Pieces, and sanitary materials and medical supplies achieved profits of 7.2, 1.3, and 300 million yuan, respectively, an increase of 80.7%, 33%, and 30% year-on-year. The growth rate of chemical drug preparations, proprietary Chinese medicines, and biochemical products is lower than the industry average.
According to the analysis of the report, the increase in the loss of the pharmaceutical industry is mainly due to the continuous rise in production costs, and the upstream production factors such as water, electricity, and coal continue to be at higher prices, which increases the pharmaceutical production costs accordingly. Rising raw material prices are currently the major bottleneck for China's economic development and cannot be effectively resolved in the short term. This will be a challenge that the pharmaceutical industry must face in the future development. In addition, due to the increase in operating costs and underemployment after the GMP reform, the pharmaceutical industry has also exerted pressure on pharmaceutical companies to reduce production costs.
In addition, the continued decline in the prices of pharmaceutical products has caused the overall gross profit level of the industry to continue to decline. The high efficiency growth of the pharmaceutical industry for more than 20 years has been changing, and the industry has entered a period of steady growth.
Governance policies begin to show significant results
The report said that the state will increase the crackdown on commercial bribery in the purchase and sale of pharmaceuticals, correct the market chaos of "more than one drug", and the introduction and implementation of various medical-related policies will have a profound impact on the industry's competitive landscape and pharmaceutical value system. The vigorous development of community medical care, the establishment of a new rural cooperative medical system, and the continuous expansion of the end market will stimulate continued growth in the demand for the domestic pharmaceutical market, and will also change the current market pattern where pharmaceutical consumption is too concentrated in large urban hospitals.
The report believes that the implementation of the generic name system will have a huge impact on the company’s business decisions and market operations in the areas of R&D, production, and marketing. A group of companies with low capacity utilization and poor quality control will be forced to stop production. Some large companies with brand strength will use integration to achieve scale and brand effect and win in the competition.
The report also pointed out that relevant departments should study specific methods, formulate corresponding regulatory policies through drug approval systems and pricing methods, curb the vicious competition of generic drugs, and reduce low-level duplicate production.
The report believes that the country's vigorous development of community medical care and the establishment of a new rural cooperative medical system will lead to an ever-expanding pharmaceutical end market, which will stimulate continued growth in demand in the domestic pharmaceutical market, and will also change the current status of drug consumption in large urban hospitals. Enterprises should be encouraged to vigorously develop the rural market and actively guide enterprises to participate in the development of the rural medicine market to solve the problem of difficulty in rural drug use.

Semi-Continuous Waste Tyre Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Flowchat of Batch Waste Tyre Pyrolysis Plant

 

Advantages of Batch Waste Tyre Pyrolysis Plant

 

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2.  Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3.  National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5.  Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

 

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

NO.	ITEM	PROJECT
1	Equipment Model	XY-7	XY-8
2	Door Model	Full Open Door	Full Open Door
3	Suitable Raw Materials	Rubber/Plastic Products	Rubber/Plastic Products
4	Structure	Horizontal Type Revolves	Horizontal Type Revolves
5	Reactor Size	Φ2200*6000mm  Î¦2600*6600mm	Φ2200*6000mm  Î¦2600*6600mm
6	Capacity for One Batch	5-6Mt; 8-10Mt	5-6Mt; 8-10Mt
7	Oil Yield of Tires	40%-45%	40%-45%
8	Work Pressure	Normal Pressure	Normal Pressure
9	Reactor Rotation Speed	0.4R/M	0.4R/M
10	Fuels Choice	Coal, Wood	Coal, Wood, Gas, Oil
11	Power	18KW/H	18-25KW/H
12	Cooling Method	Water Cycling	Water Cycling
13	Type of Drive	External Annular Gear	External Annular Gear
14	Heating Method	Direct	Direct
15	Type of Installation	With Foundation	With Foundation/Integrated Base
16	Noise dB(A)	≦85	≦85
17	Operation Mode	Intermittent Operation	Intermittent Operation
18	Total Weight(MT)	25-40	25-40
19	Installation Space Required	30m*10m	30m*10m
20	Manpower	3~4/batch	3~4/batch
21	Shipment	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR	Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR

 

Semi-continuous Waste Tyre Pyrolysis Plant

Semi-Continuous Waste Tyre Pyrolysis Plant,Newest Semicontinuous Used Tyre Pyrolysis Plant,Semi-Continuous Rubber Pyrolysis Plant,Practical Semi-Continuous Waste Tyre Pyrolysis Plant

Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com