Small Bore Size Tungsten Carbide Wire Drawing Die
Applications:
We Die's wire drawing system is used by wire producers to reduce a cross-section of wire by pulling the wire through a single die or a series of drawing dies. There are many applications for wire drawing, including electrical wiring, construction reinforcement, cables, medical and surgical applications, springs, staples, tire cord,and welding wire.
Welding Wire
Enough welding wire is produced every year to circle the globe several times. Hundreds of thousands of wire drawing dies are consumed during the production of welding wire.
Tire Cord
There are more than 1 billion tires produced every year and each tire contains bands of high tensile-strength steel wire encased in a rubber compound. Millions of wire dies are consumed each year in the production of tire cord wire.
Spring Wire
Millions of heavy duty and light vehicle engine valve, piston, fuel injection, transmission, and clutch springs are produced each year. Hundreds of thousands of wire drawing dies are consumed annually during the production of spring wire.
PC Strand
PC strand is primarily used in pre-stressed concrete buildings, bridges, parking decks, and other structures. High carbon steel rod is drawn through carbide wire dies before being used as concrete reinforcement.
Fasteners
All over the world millions of screws, bolts, nuts, rivets, nails, and staples are produced each year. Carbide wire drawing dies are essential to the production of these fasteners.
Wire Rope /Â Cable
Wire rope and cable are used in many industries -Â spanning aerospace and construction to medical and transportation. Wire drawing dies are used to form the control, constraint, and security cables used in these industries.
Specifications
No |
Product |
Items |
Mold Core |
Hardness |
1 |
Wire-drawing Die |
W103 |
φ13*10 |
1400-1600 |
1600-1800 | ||||
2 |
Wire-drawing Die |
W104 |
φ16*13 |
1400-1600 |
1600-1800 | ||||
3 |
Wire-drawing Die |
W105 |
φ20*17 |
1400-1600 |
1600-1800 | ||||
4 |
Wire-drawing Die |
W106 |
φ25*18 |
1400-1600 |
1600*1800 | ||||
5 |
Wire-drawing Die |
W107 |
φ30*22 |
1400-1600 |
1600-1800 | ||||
6 |
Wire-drawing Die |
W108 |
φ35*25 |
1400-1600 |
1600-1800 |
Â
1. Dies for drawing metal wires
2. Dies for rods.
3. Dies for tubes.
4. Dies for plugs.
5. Non-standard drawing dies
Â
YG6 YG8 YG6X YG15
The tungsten carbide drawing die adopts high-quality hard alloy as its core, with high hardness, good thermal conductivity, and low friction coefficient. In the process of using, it shows good corrosion resistance and impact resistance, and applicable to the drawing of black metal, large size wire, and which the drawing condition is worse. YG6 tungsten carbide wire rod drawing die.
A wide selection of types. Various of grades such as:Â
Tungsten carbide mark |
Density g/cm³ |
Intension  MPa |
Hardness HRA |
Application |
YG6X |
14.95 |
1800 |
91.5 |
Suitable for wire drawing die which diameter of inner bore is less than 6.00 mm. |
YG6 |
14.95 |
1900 |
90.5 |
To drawing non-ferrous metal bar which diameter of inner bore is less than 20.00mm, and pipe inner bore less than 10.00mm |
YG8 |
14.8 |
2200 |
89.5 |
Used in the drawing die for non-ferrous metal bar and tube stock. |
YG10 |
14.5 |
2400 |
88.5 |
|
YG15 |
14 |
2800 |
87 |
For steel bar and pipe with high shrinkage. |
Â
In order to the use of tungsten carbide drawing dies more efficient, there are five points for attention:Â
1.       the choice of equipment
2.      pretreatment of wire material
3.      choosing appropriate lubricant
4.       exception handing
5.      change fossilized dies in time
Company Informations
About Lihua Cemented CarbideÂ
Â
Established in 1990, specialized in production carbide products more than 20 years and located in zhuzhou city  which is the hometown of tungsten carbide in China .
Our products sold well to worldwide, has been build a long term relationship with our customers from Italy, Portugal, German, Turkey, USA, Mexico, India, Australia, South Africa etc .
Main Products
Our Main products include :Â Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills &Â Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Cusomized cutter:woodworking tool, V-cutter, textile cutter, shoes cutter ects. Any kinds of customized carbide products .
Monthly Capacity of 15Ton
We have sophisticated equipments, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine ect, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1Â day can deliver for stocks.
Strictly QC
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.
Shipping
We normally will dispatch your order within 2-10 working days depends on stock level, as soon as the order is shipped, we will list the tracking number on your order detail page, if there is any problem regarding to the shipping, please feel free to contact us.Â
Below shows the estimate delivery time for different courier:
TNT: 10-14 working daysÂ
DHL: 7-10 working daysÂ
FedEx: 8Â to 10 working daysÂ
UPS: 7Â to 10 working daysÂ
EMS: 10-14 working day
Â
Other Tungsten Carbide Products in Lihua
Â
Foreign Sales Manager: Coco
Mobile/+86 13973352165Â (available 24 hours.)
Website:Â http://en.lihuacarbide.com/
Factory Address:Â Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou, Hunan, 412000, China
Small Bore Size Tungsten Carbide Wire Drawing Die
Applications:
We Die's wire drawing system is used by wire producers to reduce a cross-section of wire by pulling the wire through a single die or a series of drawing dies. There are many applications for wire drawing, including electrical wiring, construction reinforcement, cables, medical and surgical applications, springs, staples, tire cord,and welding wire.
Welding Wire
Enough welding wire is produced every year to circle the globe several times. Hundreds of thousands of wire drawing dies are consumed during the production of welding wire.
Tire Cord
There are more than 1 billion tires produced every year and each tire contains bands of high tensile-strength steel wire encased in a rubber compound. Millions of wire dies are consumed each year in the production of tire cord wire.
Spring Wire
Millions of heavy duty and light vehicle engine valve, piston, fuel injection, transmission, and clutch springs are produced each year. Hundreds of thousands of wire drawing dies are consumed annually during the production of spring wire.
PC Strand
PC strand is primarily used in pre-stressed concrete buildings, bridges, parking decks, and other structures. High carbon steel rod is drawn through carbide wire dies before being used as concrete reinforcement.
Fasteners
All over the world millions of screws, bolts, nuts, rivets, nails, and staples are produced each year. Carbide wire drawing dies are essential to the production of these fasteners.
Wire Rope /Â Cable
Wire rope and cable are used in many industries -Â spanning aerospace and construction to medical and transportation. Wire drawing dies are used to form the control, constraint, and security cables used in these industries.
Specifications
No |
Product |
Items |
Mold Core |
Hardness |
1 |
Wire-drawing Die |
W103 |
φ13*10 |
1400-1600 |
1600-1800 | ||||
2 |
Wire-drawing Die |
W104 |
φ16*13 |
1400-1600 |
1600-1800 | ||||
3 |
Wire-drawing Die |
W105 |
φ20*17 |
1400-1600 |
1600-1800 | ||||
4 |
Wire-drawing Die |
W106 |
φ25*18 |
1400-1600 |
1600*1800 | ||||
5 |
Wire-drawing Die |
W107 |
φ30*22 |
1400-1600 |
1600-1800 | ||||
6 |
Wire-drawing Die |
W108 |
φ35*25 |
1400-1600 |
1600-1800 |
Â
1. Dies for drawing metal wires
2. Dies for rods.
3. Dies for tubes.
4. Dies for plugs.
5. Non-standard drawing dies
Â
YG6 YG8 YG6X YG15
The tungsten carbide drawing die adopts high-quality hard alloy as its core, with high hardness, good thermal conductivity, and low friction coefficient. In the process of using, it shows good corrosion resistance and impact resistance, and applicable to the drawing of black metal, large size wire, and which the drawing condition is worse. YG6 tungsten carbide wire rod drawing die.
A wide selection of types. Various of grades such as:Â
Tungsten carbide mark |
Density g/cm³ |
Intension  MPa |
Hardness HRA |
Application |
YG6X |
14.95 |
1800 |
91.5 |
Suitable for wire drawing die which diameter of inner bore is less than 6.00 mm. |
YG6 |
14.95 |
1900 |
90.5 |
To drawing non-ferrous metal bar which diameter of inner bore is less than 20.00mm, and pipe inner bore less than 10.00mm |
YG8 |
14.8 |
2200 |
89.5 |
Used in the drawing die for non-ferrous metal bar and tube stock. |
YG10 |
14.5 |
2400 |
88.5 |
|
YG15 |
14 |
2800 |
87 |
For steel bar and pipe with high shrinkage. |
Â
In order to the use of tungsten carbide drawing dies more efficient, there are five points for attention:Â
1.       the choice of equipment
2.      pretreatment of wire material
3.      choosing appropriate lubricant
4.       exception handing
5.      change fossilized dies in time
Company Informations
About Lihua Cemented CarbideÂ
Â
Established in 1990, specialized in production carbide products more than 20 years and located in zhuzhou city  which is the hometown of tungsten carbide in China .
Our products sold well to worldwide, has been build a long term relationship with our customers from Italy, Portugal, German, Turkey, USA, Mexico, India, Australia, South Africa etc .
Main Products
Our Main products include :Â Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills &Â Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Cusomized cutter:woodworking tool, V-cutter, textile cutter, shoes cutter ects. Any kinds of customized carbide products .
Monthly Capacity of 15Ton
We have sophisticated equipments, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine ect, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1Â day can deliver for stocks.
Strictly QC
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.
Shipping
We normally will dispatch your order within 2-10 working days depends on stock level, as soon as the order is shipped, we will list the tracking number on your order detail page, if there is any problem regarding to the shipping, please feel free to contact us.Â
Below shows the estimate delivery time for different courier:
TNT: 10-14 working daysÂ
DHL: 7-10 working daysÂ
FedEx: 8Â to 10 working daysÂ
UPS: 7Â to 10 working daysÂ
EMS: 10-14 working day
Â
Other Tungsten Carbide Products in Lihua
Â
Foreign Sales Manager: Coco
Mobile/+86 13973352165Â (available 24 hours.)
Website:Â http://en.lihuacarbide.com/
Factory Address:Â Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou, Hunan, 412000, China
Groove and raceway machining of bearing ring is the final processing procedure of bearing ring.The surface roughness, high quality and low noise of bearing products can be obtained by ultra-precision machining of bearing rings after fine grinding with oilstone.
It is mainly used for superfinishing the outer groove of deep groove ball bearings, angular contact ball bearings& double-row ball bearings.
Main Structures and Features
1.Adopting
SIEMENS.FANUC.MITSUBISHI
full-digital servo-control system.
2.Centerless
clamp, bearing support, bearing pressure on the end face of workpiece.
3.The
adjustment of groove position is controlled by servomtor
4.The
consumption of oilstone can be compensated automatically.
5.The
oscillation frequency of oilstone and the turning speed of work can be adjusted
by frequency convertor, rough or fine superfinishing converted automatically.
Bearing Ring Super Finish Machine
Super Finishing Machine,Bearing Ring Super Finish Machine,Grooves Super Finish,Bearing Super Finish Machine
Xinxiang Sunrise CNC Bearing Equipment Co., Ltd. , https://www.cncsunrise.com