Product Name: Plastic Moulds/molds
Product material: ABS, PP, PE or as per customer requirement.
Plastic Moulds/molds cavity: As per customer requirement
Plastic Moulds/molds size: Depends on your design.
Plastic Moulds/molds material: P20, 718...
Plastic Moulds/molds life: 800k shots
Plastic Moulds/molds Runner system: Cold runner or hor runner
Plastic Moulds/molds features: Good quality
Injection cycle time: 60seconds
Tooling time: 20days
MELEE MOULD Co., Ltd service process for Plastic Moulds/molds
1. Design/sample: Product, mould, etc.
2. Discussion: Mould material, cavity number, price, runner, payment, etc.
3. Order placed: According drawing or your samples.
4. Design mould: We will send mould design to customer for confirmation
5. Mould tooling: We start to make mould after mould design confirmed
6. Mould processing: Send pictures to customer every week for the customer to know the mould processing.
7. Mould shot trial: Send mould shot trial samples to customer to confirm mould quality
8. Delivery: Ship mould after mould quality confirmed.
Product Name | Plastic Moulds/molds |
Size | Â 800x450x500mm |
Product description | as per customer requirment |
Crate Mould/Mold cavity | 1cavity |
Crate Mould/Mold size | 1050x650x700mm |
Suitable machine | Around 650T |
Crate Mould/Mold material | P20, 718 |
Crate Mould/Mold life | 800k shots |
Crate Mould/Mold runner system | Cold runner or Hot Runner |
Ejection system |  Ejector BAR |
Crate Mould/Mold features | Good quality |
Injection cycle time | 60 seconds |
Tooling time | 20days |
High Efficiency Spirotal Heat Exchanger
The equipment is made of two rolls forming spiral channels.Two kinds of heat transfer media can flow in full countercurrent, which greatly enhances the heat transfer effect, Even small temperature difference can achieve ideal heat transfer.
The nozzle of tangential structure with Low resistance, Due to helical channel are average curvature, There is no big liquid flow, Therefore, the design flow rate can be increased so it has high heat transfer capacity.
Type I Non detachableSpiral plateHeat exchanger`s helical channel are welded and sealed, so it has high sealing performance.
Type II detachableSpiral plateHeat exchanger`s Structure principle similar to above,But one of the channel can be disassembled and cleaned, especially for heat exchange with viscous and precipitated liquid.
Type III detachableSpiral plateHeat exchanger`s Structure principle similar to above,But two channels can be disassembled and cleaned,ranges aremore extensive.
The nominal pressure PN of spiral plate heat exchanger is 0.6, 1, 1.6 and 2.5MPa (refers to the maximum working pressure of single channel) , material can be divided into carbon steel and stainless steel.Customers can choose according to the actual process
When a single device cannot meet the requirements, multiple devices can be used in combination, but the combination must conform to the following provisions: parallel combination, series combination, equipment and channel spacing is the same. Hybrid combination: one channel in parallel, one channel in series
High Temperature Spiral Plate Heat Exchanger,Spirotal Heat Exchanger Equipment,Spiral Board Plate Heat Exchanger,Carbon Steel Spiral Plate Heat Exchanger
Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com