One of our customers uses S&A CWUL-10 water chiller for the cooling of UV laser with low optical loss

The UV laser light source that must be cooled with a water chiller has high requirement on the temperature control precision of water chiller to guarantee a small fluctuation in water temperature. This is because that an increase in water temperature fluctuation will lead to more optical loss, which would affect both of the laser processing cost and the service life of laser.
According to the requirement of UV laser, S&A launches CWUL-10 water chiller that has been designed purposely for UV laser.
The 15W Inno and Newport UV lasers used by the customer require the temperature difference within a range of ±0.1 ℃, and the customer chooses S&A CWUL-10 water chiller (±0.3 ℃ ). After the operation for one year, the optical loss is measured less than 0.1W, which indicates that S&A CWUL-10 water chiller has a small fluctuation in water temperature with stable water pressure that can fully meet the cooling requirement of 15W UV laser.
Now let's have a brief understanding of the advantages of S&A CWUL-10 water chiller when it`s used for cooling UV lasers:
1. With a reasonable piping design, S&A CWUL-10 water chiller can significantly prevent the formation of bubbles to stabilize the light extracting rate of laser and extend the service life.
2. With ±0.3℃ precisely temperature control, it can also meet the temperature difference requirement (±0.1℃) of laser with low optical loss, small fluctuation in water temperature and stable water pressure;
Data obtained from the test conducted by the customer about the use of S&A CWUL-10 water chiller for the Inno and Newport UV lasers is provided as below:

One of our customers uses S&A CWUL-10 water chiller for the cooling of UV laser with low optical loss

CONTACT S&A

TE:+86-20-89301885

FAX:+86-20-84309967

SKYPE: teyuchiller

Email:

Website: http://

Bevel Gear Flange

A driving bevel gear flange assembly comprises a flange body and a dust cover flange body comprises a connecting flange and a conical cylinder body. The connecting flange end face is arranged on the end tooth shape,the inner wall is arranged on the first conical surface of the end tooth shape is arranged on the through hole:the conical cylinder outside the wall is arranged in turn on the second conical surface,boss,boss and sealing face of the screw thread sealing surface is arranged on the rounded corner;A first notch,a tooth shape and a second groove through the first circular Angle transition connection of the dust cover is provided with a thread segment installation and disassembly is convenient

Articulated Flange For Bevel Gear,Flange For Bevel Gear,Gearbox Flange Shafts,Gearbox Bearing Flange

Jilin Province Xuan Yi Trading Co.,Ltd. , https://www.xytruckpart.com

Posted on