Model NO.: CNC4000, 5000
Cutting Thickness: 1-100mm
Cutting Speed: 0-1000mm/min
Voltage: AC380V
Gas: Oxygen
Factory Location: Dongtai, Jiangsu
Company Type: SGS Audited Manufacturer
Equipment Structure: Guid Rail Fixed and Mast Move
Cutting Accuracy: 0.5mm/M
Fuel Source: Oxygen-Acetylene/ Oxygen-Acetonum
Drive Way: Servo Motor and Speed Reducer
CNC System: According to Customer Request
Also Supply: Plasma Cutter
Working Current: 220V or 380V ±10% AC
Warranty: 12 Months
Trademark: Yao Qiang Technology
Specification: ISO9001: 2008 for plasma cutting machine
Origin: Jiangsu, China
HS Code: 84569090
Model NO.: CNC4000, 5000
Cutting Thickness: 1-100mm
Cutting Speed: 0-1000mm/min
Voltage: AC380V
Gas: Oxygen
Factory Location: Dongtai, Jiangsu
Company Type: SGS Audited Manufacturer
Equipment Structure: Guid Rail Fixed and Mast Move
Cutting Accuracy: 0.5mm/M
Fuel Source: Oxygen-Acetylene/ Oxygen-Acetonum
Drive Way: Servo Motor and Speed Reducer
CNC System: According to Customer Request
Also Supply: Plasma Cutter
Working Current: 220V or 380V ±10% AC
Warranty: 12 Months
Trademark: Yao Qiang Technology
Specification: ISO9001: 2008 for plasma cutting machine
Origin: Jiangsu, China
HS Code: 84569090
Numerical control cutting machine/ Inverter air plasma cutter can be applied in lot size straight steel plate cutting, as well as various geometric shape cutting. The main frame is annealed to remove the stress, stable and endurable. The servo motor, reducer, pressure release valve, air pipe and magnetic valve as well as cutting gun used are all world famous brand to ensure excellent performance.
The CNC cutting machine uses imported AC motor, and driven with imported bevel gear reducer. With precision gear and rack move, to ensure stable function. Air cutting speed is adjusted by frequency transformer. The air source control box on the main engine can adjust air pressure from every tunnel easily. All the pressure adjusting valve and main air pipe are original imported. Pipe and wire on the broadwise cutting gun all use imported supporting chain, safe and neat.
Brief Introduction:
1. The CNC flame cutting machine is guide rail fixed, gantry gate move type;
2. The flame cutting guns will cut the flange and web of H beam;
3. Cross arm operation accuracy is within 0.5mm/m;
4. Oxy and acetylene or oxy and acetonum gas as fuel source;
5. Guide rail length is 14M*2PCS;
6. X axis Panasonic servo and pilot reducer driven, Y axis Panasonic servo and pilot reducer driven;
7. CNC system: Beijing SH-2000.
Supply scope:
Frame unit: Beam, pipe, broadwise beam and longitude and broadwise reducer and etc.
Track unit: Guide and accessories. The guide size is 14m*2PCS.
Cutting torch unit: Linear single cutting gun*10PCS and accessories.
Electric control system: Electric control cabinet, longitude and broadwise motors and accessories.
Gas source unit: Main air rubber pipe, suspending sliding vehicle and etc.
Spare parts: 1 set
Delivery:
30 days from contract.
Documents with goods:
1, Instructions including map of electricity and gas.
2, Certificate
3, Packing list
4, On site installation drawing for laying foundations.
Be free to contact:
Tracy Yan
Tel: 0086-151 5223 3338 Numerical control cutting machine/ Inverter air plasma cutter can be applied in lot size straight steel plate cutting, as well as various geometric shape cutting.
The main frame is annealed to remove the stress, stable and endurable. The servo motor, reducer, pressure release valve, air pipe and magnetic valve as well as cutting gun used are all world famous brand to ensure excellent performance.
The CNC cutting machine uses imported AC motor, and driven with imported bevel gear reducer. With precision gear and rack move, to ensure stable function. Air cutting speed is adjusted by frequency transformer. The air source control box on the main engine can adjust air pressure from every tunnel easily. All the pressure adjusting valve and main air pipe are original imported. Pipe and wire on the broadwise cutting gun all use imported supporting chain, safe and neat.
Brief Introduction:
1. The CNC flame cutting machine is guide rail fixed, gantry gate move type;
2. The flame cutting guns will cut the flange and web of H beam;
3. Cross arm operation accuracy is within 0.5mm/m;
4. Oxy and acetylene or oxy and acetonum gas as fuel source;
5. Guide rail length is 14M*2PCS;
6. X axis Panasonic servo and pilot reducer driven, Y axis Panasonic servo and pilot reducer driven;
7. CNC system: Beijing SH-2000.
Supply scope:
Frame unit: Beam, pipe, broadwise beam and longitude and broadwise reducer and etc.
Track unit: Guide and accessories. The guide size is 14m*2PCS.
Cutting torch unit: Linear single cutting gun*10PCS and accessories.
Electric control system: Electric control cabinet, longitude and broadwise motors and accessories.
Gas source unit: Main air rubber pipe, suspending sliding vehicle and etc.
Spare parts: 1 set
Delivery:
30 days from contract.
Documents with goods:
1, Instructions including map of electricity and gas.
2, Certificate
3, Packing list
4, On site installation drawing for laying foundations.
Be free to contact:
Tracy Yan
Tel: 0086-151 5223 3338
Latest Fans,Chandelier With Led Light,Chandelier With Led,Ceiling Fan With Transparent Blades
ZHONGSHAN UFAN ELECTRIC APPLIANCE CO. LTD , https://www.ufanelectric.com