Injection Mould for Television Cover

• Model NO.: L-026
• Surface Finish Process: Electroplating
• Plastic Material: ABS
• Application: Car, Household Appliances, Commodity, Electronic, Home Use, Hardware
• Design Software: AutoCAD
• Certification: ISO
• Customized: Customized
• Mould Life: 500,000~1,000,000 Shot
• Experience We Have: 15 Years
• Trademark: can be customized
• Origin: Dongguan, Guangdong Province

• Shaping Mode: Injection Mould
• Mould Cavity: Multi Cavity
• Process Combination Type: Progressive Die
• Runner: Hot Runner
• Installation: Fixed
• Standard: PUNCH
• Gate: Pin Point Gate
• Cavity: Custom Cavity
• Hardness of Steel: 28-50HRC
• Specification: ISO standard
• HS Code: 8480710090

Injection mould for Television cover
 

 mould/plastic injection mould/plastic injection tooling

1.Steel of mould:P20,718,H13,2316,2344,2738,NAK80,M300,S136,3Cr13or as customer's requirement

2.Mould run fully automatically

3.Mould life: 500,000~1,000,000 shot

4.Cavity:Single/multi

5.runner:Hot/cold

6.Design software:IGS,STP,XT,CAD etc.

7.Plastic material:PP,PC,PE,PU,PVC,ABS,PMMA etc.

8.Delivery time:40-50 days

9.Specification:Depends on customer's requirements.

Molding making procedure:

 After inquiry received, our engineers will analyze the drawing or samples and exchange the opinion about the potential difficulty or invisible problem. If needed, we will suggest right solution accordingly to make good plastic products while cutting cost.

Our quotation will be worked out after the initial mould design or products requirements are clear. In another words, both of two parties will understand whether the project is workable and what the right solution is before the price come out.

 After order confirmed and the deposit received, our engineer will offer an analysis, in which customers will get the information including gate location, ejector pin location and other design details. For complex products, or large size products, especially those need hot runner, we will adopt mold flow analysis which can predict the potential defective or flaw, by simulating the injection molding processes, as shown in the picture below. In this way, customers will know the product condition before the mould making. Only after design approved, mould making can be started.

 During the mould making process, we will apply the precision machines, for example, CNC machining, EDM, wire-cutting, especially, the 2.5 dimension measuring to check the electrode, parts, and products. In this way, we will find out the unexpected mistake in advance. In another words, it allows us to provide the good quality while saving the time and cost.

 Our in-house injection department will test the mould by injecting the samples. The final qualified samples will be sent out to customers for approve.
Mould pictures display:

Factory sightseeing

Welcome to visit our factory for sightseeing !

Milk Warmer and Frother

Milk Warmer And Frother,Electric Milk Foamer,Coffee Accessories Milk Frother,Electric Milk Frother Machine

Heshan Zilong Home Appliance Technology CO.Ltd , https://www.techonelfoodmixer.com