How to deal with the cable and connector of the camera in the security monitoring system?

For the network camera, its line setting method is obviously more abundant than traditional analog equipment. However, no matter which transmission method is used, interference is one of the issues we have to pay attention to. Especially for wired transmission of video signals, the co-directional transmission of signal lines and high-power wires is undoubtedly a taboo in the process of wiring, and it is not allowed to put them in the same transmission line tube for the convenience of construction.

Even if it is impossible to separate the two due to environmental constraints, it is necessary to ensure a separation distance of at least half a meter. Only such a plan can better avoid the impact of strong magnetic interference on video transmission, and for devices using wireless signal transmission, although there are fewer restrictions on the line.

But the camera itself should also avoid strong magnetic interference sources around. At the same time, ensure that the camera is insulated from the ground. In addition, we must also pay attention to avoid the influence and obstruction of the line to the work of the gimbal. Use oxygen-free copper 0.5 wire diameter national standard network cable, gold-plated crystal head, use RVV 2*0.5 sheath cable within 30 meters of power cord, RVV 2*0.75 sheath cable for 30-50 meters, RVV 2* over 50 meters 1.0 sheathed wire, PVC is generally used for the threading pipe. If buried or explosion-proof, galvanized steel pipe is used.