Hot water delivery vehicles need to know

Hot water transport vehicles are mainly used to supply hot spring water to hot spring bath centers, hot water for heating stations, or thermal tank water tankers that distribute hot water to baths, bath centers, hotels, restaurants, bathhouses, and schools. The relevant information when using hot water trucks is as follows:

1. The driver of a hot water truck must be a full-time driver, and he must abide by the "Safe Operation Regulations for Motor Vehicle Drivers" during daily driving operations.

2. Hot water truck drivers must check whether the various parts of the vehicle are connected loosely before leaving the car, whether the tire pressure is normal, whether there is oil leakage, leakage of coolant, leakage, leakage, etc., and check the lubricant, coolant, system Whether the fluid, electrolyte, etc. meet the standards.

3 , the water temperature of the receiving end must ensure that the tank can be filled with water above 80 °C.

4. In the stage of adding water to the waterwheel, the water deliverer must observe whether the process of adding water to the water pump is steady and normal in a safe position. If any abnormality is found, immediately take emergency measures to stop the pump.

5. When the water truck adds water to the designated location, the water supplier must immediately stop the operation of the water pump and switch the power switch of the local power distribution unit to the open state.

6. When the pump stops running for more than 1 minute completely, the water supplier can confirm that the pipe has no water, and then the quick connector clamp connected to the water tank at the water end can be opened, the quick connector is completely disconnected, and the water tank water hose is retracted. car.

7. After the waterworker has checked all the valves of the waterwheel and the water tank cover are closed, and the water tank itself has no safety hazard, the driver can start the car and prepare to leave.

8. After starting the vehicle, the driver should check whether the engine, steering system, brake system, transmission system, safety devices, lights, and meters are operating normally. Before starting the vehicle, he must carefully observe the surrounding environment and drive before confirming safety.

9. Insulation water trucks are prohibited from smoking, eating, chatting, talking on the phone, fatigue driving and other activities that impede safe driving. They must not be over-speed or overloaded. The driver must concentrate and always pay attention to the conditions on the road.

10 , hot water transport vehicles should be kept at a constant speed as possible when driving, can not be hard to hit the direction or slam on the brakes to avoid the vehicle due to water inertia and traffic accidents.

 

Architectural Construction Aluminium Profile

Architectural Construction Aluminium Profile,Aluminum Sliding Window Frame,Aluminium Extrusion Door Frame,Aluminium Furniture Profile Extrusion

Foshan Modern Copper & Aluminum Extrusion Co.,Ltd. , https://www.fmcaarchitectural.com