High Performance Radial Tyre (RX3)

  • Type: Tubeless
  • Tire Design: Radial Tyre
  • Tread Pattern: Highway Tread Pattern
  • Specification: ISO DOT ECE S-MARK REACH
  • HS Code: 401120
  • Diameter: 14" - 16" Series
  • Certification: ISO/Doe/ECE/Reach etc.
  • Trademark: JOYROAD
  • Origin: China
HIGH PERFORMANCE RADIAL TYRE (RX3)

TYRE SIZE
<14" Series>
185/60R14; 185/65R14; 195/60R14; 195/70R14; 205/70R14
<15" Series>
185/55R15; 185/65R15; 195/50R15; 195/55R15; 195/60R15; 195/65R15; 205/60R15; 205/65R15; 215/65R15; P215/75R15; P225/75R15
<16" Series>
205/55R16; 205/60R16; 215/60R16; 225/60R16


TYRE FEATURES

- 4 wide longitudinal grooves ensure effective water
- Two anti-uneven-wear strips at the shoulder in order to stabilize tire profile and ensure sufficient shoulder support and stability at high speed cornering
- Special compound design with low heat generation, and high grip performance provides super dry and wet handling
- The special design with sipes at the shoulder block effectively reduces the shoulder heat generation and resonance during tire rolling
- Superior water evacuation ability with full cover of streamline transversal grooves to ensure good wet traction for better steering and high speed stability
- Continuous center rib ensures straight line stability

TYRE MOUNTING

- The same axle should be mounted the tyres in identical size and structure.
- Please confirm the condition of tyre and rim before mounting and ensure the properly matching of tyre and rim, the damaged tyre and rim should never be used.
- The replacement of tire and rim must be operated by trained staff and through necessary equipments.
- The old valve must be replaced when you change a new tyre, and ensure that there is no leakage in valve area.
- The inflation pressure should not exceed the pressure recommended.
- Please keep safe when you mount the tyre.

Q & A OF SAFE DRIVING TIPS TIRE BASIC KNOWLEDGE

Q: HOW TO DRIVE SAFELY IN RAINING DAY?
A: After the tire worn, the water evacuation ability of the tire will change significantly. New tires evacuate water very well and have shorter braking distance in the raining day. However, when the tire in used or worn, water evacuation ability will decrease. In the raining day, the tire will slide and float on water at high speed therefore it is necessary to check the tire condition carefully before drive.

Q: WHAT HAPPENED WHEN THERE IS A BULGE ON THE TIRE SIDEWALL?
A: If there is a bulge on the tire sidewall like a bubble, please replace with new tire immediately. Such bulge is caused by the damage of body ply inside the tire when the tire is rolling over the step of the sidewalk, or a hole if such damaged tire is used there is a risk of tire burst.

Q: IS IT DAGEROUS IF TIRE PRESSURE IS NOT ENOUGH?
A: If the tire pressure is low, it will result in more fuel consumption, easier hydroplaning, less steering stability. Furthermore, the significant deformation of the tire will cause high temperature of the tire and high tire burst risk, therefore it is necessary to check regularly the tire pressure (including spare tire), please measure the tire pressure when the tire is cool, please DO NOT measure the tire pressure or deflate the tire immediately after its usage. Besides, when changing the tire sizes, please consult to the dealer for correct tire pressure.

Q: HOW TO DRIVE IN HOT SUMMER?
A: 1- Accelerate the car smoothly, use less emergency brake; 2- When the tire is too hot, please do not use cold water for cooling; 3- Prevent the tire form damage when driving on rough roads; 4- Avoid sharp turn and huge tire deformation to prevent from tire burst and vehicle rollover.

PROPER STOCK METHOD FOR THE TIRE

Please stock the tires at stand position in the shadows when not in use to avoid high temperature and humidity. Also tires must be kept away from those machines which generates ozone, such as copy machine mercury lamp, oily materials. When preserved properly, tires can keep freshness like food.

Our company can design and manufacture the Plastic Injection Mould of digital electronics products, including the injection mold in camera, scanner, telephone, TV etc. There is high requirement in quality and precision for some of them. Our company can also make the plastic products. We have single color and two-color injection molding machines of different tonnage. And it can meet different customers' requirement.

Mould For Digital Electronic Accessories

Digital Electronic Mould,Mould For Digital Electronic Accessories,Electronic Digitalproduct Accessories,Portable Game Machine

KUNSHAN YSL PRECISION MOULD CO.,LTD , https://www.yslprecisonmould.com

Posted on