![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
[Procedures] Article 333 The ground explosives warehouse must have a special suite or a separate room for the release of explosives. In the explosives distribution suite of the sub-library, the blaster's air-explosive box and detonator can be temporarily saved. When the detonator is issued in the detonator distribution suite of the sub-library, it must be carried out on a table with a conductive soft cushion and edge projections.
[Executive Note] The ground distribution room should be set up separately. When it is built with the warehouse, the distribution room should be separated from the warehouse by a solid wall. Set a signboard at the prominent position outside the distribution room (the detonator issuance room, quantitative 1000 rounds). Issued separately provided at least between the two should be not less than 5kg with ammonium salts of phosphorus powder fire extinguisher. Issued detonator suite ground and laying surfaces should be static conductive rubber skin (sheet), which at the laying and use of the metal net wire is grounded. The detonator dispensing suite shall be provided with an electrostatic discharge device, and the operator entering the distribution room shall perform the operation after discharging static electricity. The detonator issuance suite can allow up to 1000 detonators to be temporarily stored. It is strictly forbidden to place the scattered detonators on the ground and should be hung on the rack or stored in the explosion-proof box. The height of the edge of the electric detonator dispensing table is at least 10 mm higher than the soft cushion.
Smart Lock,Qr Code Smart Lock,Smart Automatic Induction Lock,Smart Keyless Cabinet Locks
Dongguan Kaisijin Intelligent Technology Co., Ltd , https://www.oemsmartlock.com