Functional description and instructions for use of portable cable presses

The portable cable marking machine does not use lead marks, as long as the cable is found on both sides of the machine can be completed, in any site can be construction, regardless of number, length to complete the task at one time, effort, time, automatic and convenient, is the cable management The ideal equipment is the ideal choice for coal mines, iron ore, oil field drilling and well construction, as well as the rubber cables of major factories. The utility model belongs to a cable imprint code mechanical device, which is connected by a code wheel and a coder. The code wheel is provided with a length code, a symbol, a square code and a number code, and two heaters and digital codes are arranged in the body. Hot plate, the cable is fixed by two adjusting sliders and cable fixing brackets, and the pressing machine imprints the code on the cable at one time. The portable cable marking machine has a simple structure, convenient operation, a clear one-off number, continuous embossing of the code, and low cost.

Portable cable press instructions:

1, open the protection box, righting arm, install the pressure line;

2, adjust the required number, square, length digital code;

3, adjust the cable slider according to the cross-sectional area of ​​the cable;

4, the cable into the body to tighten the arm;

5, connect 220v power supply;

6. Turn on the power switch and adjust the temperature to the desired temperature (about 130°C);

7. When the temperature drops to 60-40°C, remove the cable.