Flexible Graphite Gasket with Mould Seal Ring for Industry

Model NO.: Item: HY-G410
Type: HU1
Balance: Balanced
Color: Black
Formation: Molding Flexible Graphite Tape ,Packing
Application: Sealing of Valves, Pumps and Expansion Joints
Density: 1.2-1.75g/cm3
pH: 0-14
Trademark: hysealing
Transport Package: Carton
Specification: SGS
Origin: Ningbo, China
HS Code: 38011000
It is formed by molding flexible graphite tape or flexible graphite braided packing, metal materials can also be put in, they are often used together. It is mainly used for sealing of valves, pumps and expansion joints which are used in oil industry, chemical industry, thermoelectric station, nuclear, etc.

 		 Fans (Dry running) Agitators Valves
Pressure 10Bar 50Bar 800 Bar
Shaft speed 10m /s 5m /s 2m /s
Density 1.2~1.75g/cm 3   (Normal: 1.6g/cm 3 )
Temperature -220~+550°C (+2800°C in non-oxidizing environment)
PH range 0~14

APPLICATION:
It can be used in weak acids and alkalis or media containing few grains of solid particles, both dynamic and static, mainly used for centrifugal pumps, plunger pumps, mixers and valves.
Without cooling it can be used with hot water up to 160° C, with cooling it can be used with hot water up to 207° C. Particularly ideal for hot water, condensate and main coolant pumps.
BraidBraided from low-sulphur expanded graphite yarns, which are reinforced by cotton or glass fiber. It has a very low friction, does not damage shafts or stems. It shows good thermal and chemical resistance and high elasticityed from low-sulphur expanded graphite yarns, which are reinforced by cotton or glass fiber. It has a very low friction, does not damage shafts or stems. It shows good thermal and chemical resistance and high elasticity
Braided from low-sulphur expanded graphite yarns, which are reinforced by cotton or glass fiber. It has a very low friction, does not damage shafts or stems. It shows good thermal and chemical resistance and high elasticityBraided from low-sulphur expanded graphite yarns, which are reinforced by cotton or glass fiber. It has a very low friction, does not damage shafts or stems. It shows good thermal and chemical resistance and high elasticity.
Flexible Graphite Gasket with Mould Seal Ring for Industry

LED Heat Sink FEATURES:

The aluminum material is melted in high temperature and become liquid status, then we pour it into the mould,. After cooling down, the product could be finished easily. We will take good care during the cooling process to avoid the bubble occurs. There's wide range of shape for Heat Sink in die-casting process.

In addition, if the quantity is huge enough, the cost would me much cheaper.
Many complicated metal components are produced by this process.

● High structural integrity

● Smooth die casting parts surface

● Reduce or eliminate secondary machining operation

● Rapid production rate

LED Heat Sink

LED Heat Sink,Heat Sink,Die Casting Heat Sink,Aluminum Die Casting Heat Sink

Zheke Mould Technology Co. Ltd. , https://www.zkdiecasting.com

Posted on