1. Duty staff job responsibilities:
1.1. Responsible for the production coordination of the four workshops of crushing, grinding, dewatering and electromechanical repair;
1.2. Coordinate the use of electromechanical maintenance workers required for each workshop;
1.3. Responsible for the supervision of the whole plant ore transportation and the quality and quantity of ore;
1.4. Responsible for the normal operation of all equipment in the whole plant. If there is any disease or illegal operation on the equipment, the production team leader shall be notified in time and ordered to repair and correct it;
1.5. Responsible for the production of water supply throughout the plant, and urge the relevant workshops to do the water storage work to ensure sufficient water for production;
1.6. Responsible for the safety supervision and inspection of the whole plant, do a good job of flood control, fire prevention and anti-theft inspection to ensure the safe operation of production;
1.7. Responsible for the environmental protection spot check of the whole plant, timely eliminate environmental hazards and prevent environmental accidents.
2. On-duty staff authority:
2.1. When various production processes and equipment failures or other reasons need to be shut down, the duty personnel must be reported. For emergency shutdown, the personnel on duty should be reported after checking the cause. The duty personnel should make detailed records. If there is no record, the penalty is 100 yuan each time. For those who do not report the reasons and privately stop the machine, each time the penalty is 100 yuan, resulting in consequences, the economic responsibility shall be investigated according to the loss. If the downtime is more than 2 hours, notify the person in charge of the workshop and the equipment supervisor, and report the approval of the factory leader for 4 hours of downtime;
2.2. During the shift, if the equipment is faulty and needs to be repaired, in addition to notify the relevant personnel, it is necessary to report to the factory in time, and at the same time, go to the scene, be responsible for on-site command and coordination, and ensure that the repair work is carried out normally.
2.3. On duty during the shift, each class shall be inspected at least three times. During the inspection, employees who violate the regulations and violate the rules shall be corrected or given relevant punishments. The specific standards refer to the Labor Management System of the Concentrator. For serious violations, they shall be ordered to immediately rectify and notify the squad leader to supervise the execution;
2.4. On duty, during the shift, the person on duty has the right to mobilize vehicles and electromechanical repair personnel, but the allocation should be reasonable. If they do not obey the reasonable allocation, they have the right to impose penalties.
3. Duty discipline
3.1. On-duty personnel must be on duty on time, from 20:00 to 8:00 on the same day of each class. If there is something, please ask the factory leader to agree before leaving, otherwise it will be considered as completion;
3.2. Make a record during the shift, and record the violations and violations of the work and the problems on the process and equipment in detail, so that they can be stored in a detailed and tidy manner;
3.3. The duty officer must turn on the mobile phone during the shift to work in contact.
Aluminum Sleeve Cable Crimps Wire Rope Ferrules 8 shape and our company Juke Metal products Co.,LTD stocks Wire Rope Oval Aluminum Ferrule,Anti-rust Glass Fence,Steel Round Bar,Shackle, Turnbuckle, Wire rope clips, Sleeves, Thimble, Link Chain, Hooks, Eye Bolt, Steel Wire Ropes, Sheaves, Plate, etc.
Usage: Lifting, rigging, marine hardware
Material: Aluminum or According Customer Request
Size: Different size available
Special sizes can be produced according to customers' requirements.
Wire Rope Ferrules,Aluminium Sleeves Ferrules,Ferrules For Wire Rope,Double Ferrule Wire Rope
Jiangsu Juke Metal Products Co.,Ltd. , https://www.jsjukemetal.com