Bohai Highway Guardrail Forming Machine

Main parameter
1. Specification of rolling material: Width: 480mm; Thickness:3-4mm;       Q235A Galvanized steel sheet.
2. Working speed: 10 -12m/min
3. Roller steps: 13 pairs main rollers & 7 pairs flattening rollers
4. Material of roller: GCr15 bearing steel, quenched, HRC58°-62°
5. Material of main shaft: superior 45# steel, tempered.
6. Diameter of main shaft: ¢85 mm
7. Main motor power: 35 kw
8. Transmission:double-row chain drive
9. Structure of forming machine: wallboard
10. Flattening motor power: 2.2 kw
11. Hydraulic motor power: 11 kw, Pressure: 20 Mpa
12. Material of Punching and Cutting mould:Cr12
13. Cutting blade heat-treated.:HRC58°-62°
14. Punching and Cutting Way:Adopt hydraulic driving, flat panel punching, cutting after roll forming.
15. Electric control system: whole machine adopts PLC frequency control, Cut-to-length error≤±2mm
16. Machine dimension:13500mm×2700mm×1600mm
  
Equipment configuration  
Manual Feeding device (3 T capacity), transmission, flattening device, before-punching device (2 sets), main machine and roller (including guide table), cutting (after roll forming) device, hydraulic system, electric control system, run out table, etc.

Production process

Sardine Processing Line

Fish Fillet Machine,Fish Packing Machine,Fish Cutting Machine,Sardine Processing Line

Zhoushan Golden Pard Machinery Co., Ltd.   , https://www.goldenpardmachines.com