![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Anti-corrosion magnetic flap level gauge, also known as lining type magnetic flap liquid level gauge, is widely used in chemical, oil refining, storage and transportation, water treatment and other industries, for strong acid, alkali, strong oxidant, organic solvent and other media. Level measurement in the middle. In order for the anti-corrosion magnetic flap level gauge to be better applied, it is necessary to properly install and use it. The precautions for the installation and use of the anti-corrosion magnetic flap level gauge are as follows:
First, in order to ensure the normal operation of the anti-corrosion magnetic flap level gauge, the surrounding material cannot be close to the magnetic substance, and the meter can not be fixed by the wire.
2. A valve should be installed between the magnetic flap level gauge and the container to cut off the material during cleaning and overhaul.
Third, for the 304 lining PTFE anti-corrosion magnetic flap level gauge, because the pontoon and flange joints use a unique sealing structure, it needs to be assembled with special tools. In order to ensure the sealing reliability, it is forbidden to disassemble after leaving the factory.
4. After the installation is completed, it is necessary to use magnetic steel for calibration, so that the anti-corrosion magnetic flap liquid level gauge shows silvery white above zero.
5. When putting into operation, first open the liquid guiding pipe valve on the anti-corrosion magnetic flap level gauge, and then slowly open the lower liquid guiding pipe valve to allow the liquid medium to flow smoothly, avoiding the rapid rise of the liquid medium with the float, resulting in the turning Flip failure or chaos (in case of this phenomenon, magnetic steel can be used for correction).
6. Anti-corrosion magnetic flap level gauge should not have solid impurities in the float to avoid blockage or damage to the float. The float can be cleaned periodically to remove impurities from the inside of the float depending on the medium.
7. When using electric heating, non-magnetic materials such as copper tubes must be used. In addition, the temperature of the heat tracing needs to be adjusted according to the specific conditions of the medium.
8. If the installed anti-corrosion magnetic flap level gauge has a false liquid level during use, you can follow the steps below to troubleshoot:
1. Check if the circuit is working properly.
2. Use magnetic steel to scan along the outside of the instrument for calibration;
3. If the steam pressure is large, first close the gas phase valve, then press the liquid in the tube back to the storage tank, and then perform step 2;
4. The external interference signal is too large, resulting in the generation of false signals in the circuit.
Alkaline Water Pouch, Antioxidant Hydrogen-rich Water Pouch, Mineral Water Pouch, Energy Water Pouch Online for Sale.
Provide different Wellness Alkaline Antioxidant Hydrogen-rich Mineral Energy Drinking Water solutions depends on your local market.
Any questions, feel free to get in touch with Filterelated team, filterelated@gmail.com are ready to serve you!
Alkaline Water Pouch,Alkaline Water Infuser,Alkaline Water Pod,Alkaline Water Bag
Filterelated Corp. , https://www.nbfilterelated.com