Achieve a strong bond between the conductor and the insulation

The inner conductor is extruded with a pre-insulation of polyethylene and other auxiliary materials in a certain proportion. The innermost outer conductor uses a self-adhesive aluminum-plastic composite film to achieve a firm bond between the conductor and the insulation. The degree of bonding between them can be roughly checked by manual peeling.

The braided pattern on the surface of the sheath is extruded using a squeeze die. The plastic is tightly packed on the core with a certain pressure, and the cable structure is stable. However, in such a sheath, part of the plastic is filled in the gap of the woven mesh under pressure, and the surface of the woven mesh tends to appear on the surface. opposite of this. When using the extruded tube mold, the plastic is tubular and leaves the machine head, and is wrapped by the radial shrinkage on the wire core to adjust the traction speed. The surface can be made very smooth. The inner layer is larger than the outer diameter of the core and cannot be stabilized. The structure of the cable. The manufacturer should try to squeeze the sheath to look good, but the user must also understand the intention of the industry to allow the sheath to be "allowed to have a slight weave pattern" and put the inherent quality requirements first.

Cable TV network can become a high-speed broadband network because of its inherent characteristics, but whether this possibility can be realized depends on many factors such as the quality of the devices used. In fact, the domestic TV cable market is still quite chaotic. The price of the product is different, and the difference in quality is even greater. For the factory, it is not difficult to screen out a certain number of samples, but stable and consistent mass production is not easy.

Sliver Plating Line

Metal electroplating line is widely used in aircraft and auto parts, machinery parts, metal, hardware processing industries, including cooper plating, silver plating, zinc plating, nickel plating, gold plating, chrom plating, anodizing, electrophoresis production line,etc.

The silver-plated wire is made by concentrically plating a silver layer on a copper core. It combines the characteristics of two metals, has good electrical conductivity, and a bright and shiny surface, and the silver layer has high corrosion resistance. Because of these advantages, silver-plated wires have become the first choice for high-frequency wires and colored textile wires.

Sliver Plating Line,Plating Production Line For Sliver,Metal Sliver Plating Production Line,Metal Sliver Plating Line

Wuxi Xingyi Intelligent Environment Protection Equipment Co.,Ltd. , https://www.xingyimachinery.com